说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 评定误差
1)  Evaluation error
评定误差
2)  Error evaluation
误差评定
1.
After signal processing and error evaluation ,the horizontal and vertical straightness errors as well as the straightness error of bore can be measured simultaneously.
为了实现炮管直线度的高精度测量,提出基于激光准直技术和光电探测技术的测量方法,解决了光学系统设计及传感器的精密定位问题,给出了软硬件解决方案,实现了水平和竖直方向直线度的同时测量,同时显示,经直线度误差评定,得出炮管直线度的误差值;经实测,该设备的分辨率可达0。
2.
 This paper analyses the theory and application of cylindricity error evaluation, establishes a kind of programming model for evaluation of cylindricity error, and discusses the minimum conditions criterion.
对圆柱度误差评定理论及应用进行了研究,建立了圆柱度误差评定的规划模型,探讨了误差评定的最小条件判据,提出直接求解规划模型的修正单纯形法,并给出了求解的步骤。
3.
Solutions to heart-shaped loop including the solution to minimal circumscribed heart-shaped loop, maximal inscribed heart-shaped loop and minimal zone heart-shaped loop and the error evaluations of non-perimeters were suggested in detail.
详细介绍了心形线边界的求法 (包括最小外接心形线求法、最大内切心形线求法和最小区域心形线求法等 3种方法 )以及进行不圆度误差评定的方法。
3)  error assessment
误差评定
1.
The paper gives the mathematical model of linear error assessment and presents the method to calculate in excel.
本文给出了直线度误差评定的数学模型,提出了用Excel来计算直线度误差,用实例进行了说明。
2.
The development of the error assessment software of helical surfaces is a system engineering, which developed on the relationship among measuring point distribution, measuring point amount and the error, helical surface fitting, models matching, error assessment, software function planning, software tools selection, software compiling and etc.
螺旋曲面误差评定软件研制是一项系统工程,涉及到测点布置方法、测点数量与误差关系、螺旋曲面拟合、重构模型和标准模型匹配、误差评定、软件功能规划、软件工具选择、软件编制等内容。
4)  error assess
误差评定
1.
Application of WENZEL coordinate measuring machine in measuring and error assessing of complex freeform surface of a air channel was introduced, including the precision fitting of the digital model and the air channel and the function of auto-measuring by selecting surface points on the digital model using mouse.
以某具有复杂自由曲面的通道进气口检测为例,介绍了WENZEL三坐标测量机在自由曲面误差评定中的应用(包括被测实物与其三维模型的精确拟合,通过鼠标点取模型上待测元素以实现复杂自由曲面的自动检测等);实验证明了三坐标测量机该功能的高效准确。
5)  rater's error
评定者误差
6)  cylindricity error evaluation
圆柱度误差评定
1.
According to the characteristics of cylindricity error evaluation, the computation methods of objective functions' mathematic model is established when adopting Minimum Zone Cylinder (MZC), The Least square Cylinder (LSC), Minimum Circumscribed Cylinder (MCC) and Maximum Inscribed Cylinder (MIC) to evaluate cylindricity error in Matlab.
针对圆柱度误差评定的特点,建立了用M atlab实现圆柱度误差最小区域法、最小外接圆柱法和最大内接圆柱法评定时目标函数数学模型的计算方法。
补充资料:《房屋修缮工程质量检验评定标准》


《房屋修缮工程质量检验评定标准》


  《房屋修缮工程质量检验评定标准》中国建设部颁布的规章之一。房屋修缮施工单位对完成的工程项日,要根据《房屋修缮工程质量检验评定标准》评定质量等级.进行竣工验收,不合格的不准交工。在工程正式交验前应预检,对整个工程项目、设备运转情况及有关技术资料全面进行检查,对检查出的问题应做好记录,定期解决,然后才邀请发包、设计单位正式验收。竣工验收的依据一般应包括:工程合同、修缮设计或修缮方案,及有关图纸或技术说明、会审交底记录、设计变更鉴证、材料试验报告单、隐蔽工程验鉴记录、房屋设备安装试调和试压记录等技术资料。竣工交验标准是:全部完成合同及设计(方案)要求的工程内容,质量符合标准及设计(方案)要求;具备住用条件,门窗开闭灵活、严密,灯亮,水通,煤气通,烟道通,暖气热,装修设备完好,场地整洁,排水和道路畅通,余料弃土清理完毕;技术资料齐全、准确;作出质量评语,填写单位工程质量评定表;原有修缮设计图纸的工程,要提交竣工图。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条