1) temper martensite embrittlement
低温回火脆性
1.
The different quantities of As and Sb were added to 30CrMnSiA steel,The influencing regulaties of these elementson temper martensite embrittlement were investigated by TEM,SEM and ABS.
在３０ＣｒＭｎＳｌＡ钢中加入了不同量的砷（Ａｓ）和锑（Ｓｂ），应用扫描电镜、透射电镜及俄歇能谱研究了这些元素对低温回火脆性的影响规律。
2) high temperature temper embrittlement
高温回火脆性
1.
By analytical testing the material discovered that it has high temperature temper embrittlement.
经过对材料的分析试验,发现其具有高温回火脆性。
3) temper brittleness
回火脆性
1.
The investigation shows that this defect arises from temper brittleness of the steel.
试验表明,其原因是钢的回火脆性所致。
2.
The cold crack sensitiveness and temper brittleness of three pressure vessel steels for high temperature,high pressure and hydrogen environment were compared and analyzed in this article.
分析比较了214 Cr-1Mo,214 Cr-1Mo-14 V和3Cr-1Mo-14 V三种高温高压临氢压力容器用钢的冷裂敏感性和回火脆性,提出了对热壁加氢反应器的选材建
3.
Cr Mo steel's temper brittleness is expounded,the affecting factors of temper brittleness of 21/4 Cr 1Mo steel in hydrogenated reactor are analyzed.
全面阐明了铬钼钢回火脆性的基本概念 ,分析了加氢反应器用 2 Cr- 1 Mo钢回火脆性的影响因素 ,指出了防止回火脆性破坏应采取的措施。
4) Temper Embrittlement
回火脆性
1.
Influence of Applied Stress on Temper Embrittlement of 2.25Cr-1Mo Alloy Steel;
作用应力对2.25Cr-1Mo合金钢回火脆性的影响
2.
Study of reverse temper embrittlement NGS mechanism in steel 12Cr1MoV;
12Cr1 MoV钢的可逆回火脆性非平衡晶界偏聚机制研究
3.
Temper Embrittlement of Steels for Heavy Forging;
大型锻件用钢的回火脆性
5) low temperature brittleness
低温脆性
1.
The effect of different melting methods on low temperature brittleness of steel 10CrSiNiCu was studied.
用示波冲击方法研究了不同冶炼方法对１０ＣｒＳｉＮｉＣｕ钢低温脆性的影响。
2.
The results show that ZGMn13 steel has low temperature brittleness.
研究结果证实了高锰钢具有低温脆性，加工硬化使高锰钢的脆性增加，韧脆转化温度升高；冲击断口由室温下的韧窝断口逐渐转化为低温下的沿晶断口，在加工硬化时还会出现解理断口。
6) Temper brittleness transition temperature curve
回火脆性转变温度曲线
补充资料：回火脆性
见回火。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条