说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 张拉薄膜结构
1)  tensioned cable-membrane structures
张拉薄膜结构
1.
Dynamic characteristics of tensioned cable-membrane structures;
张拉薄膜结构动力特性研究
2)  tensile membranes
张拉式薄膜结构
3)  tensioned membrane structure
张拉膜结构
1.
Study on full process experiment of full scale tensioned membrane structure;
张拉膜结构模型全过程试验研究
2.
Force density method is frequently used for form finding of tensioned membrane structure.
力密度法是张拉膜结构找形分析中最常用的方法之一 。
3.
The analysis of a tensioned membrane structure for gymnasium in a university of Hainan is taken as an example to illustrate the design and analysis method of large-scale tensioned membrane structures.
以海南某高校风雨球场张拉膜结构为例,给出了大型张拉膜结构的分析设计方法,探索了张拉膜结构的找形与荷载分析特点,可供类似工程参考。
4)  tensile membrane structure
张拉膜结构
1.
Combined method for quick analysis of tensile membrane structures;
混合法实现张拉膜结构的快速分析
2.
Based on the force-density method,this paper deduces the formulations of mixed force-density method,solving the form-finding problem of the tensile membrane structure with elastic piles.
本文在力密度法的基础上推导了混合力密度法,解决了带弹性拉压杆张拉膜结构的找形分析问题,并编制相应的计算程序对工程实例进行计算,计算结果表明,本文的方法数值稳定、收敛快、精度高,适合运用于张拉膜结构的整体找形分析。
5)  membrane structure
张拉膜结构
1.
Membrane structure is a kind of new structure form,in this paper,it presents design contents in detail by the design and research of gentle boundary cape point in membrane structure.
张拉膜结构是一种新型的结构形式,通过对张拉膜结构柔性边界膜角点设计研究,详细的介绍了设计内容,给出了张拉膜结构柔性边界膜角点设计的一些有意义的结论,为类似的工程实践提供了有益的参考。
2.
As the technology develops and the materials are refined, the membrane structure, which dates back to the 1950s, has become an increasingly acceptable spatial structure in recent 20 years.
张拉膜结构诞生于20世纪50年代,随着张拉膜结构技术和材料不断成熟,近20年来张拉膜结构逐渐成为一种可接受的空间结构形式。
6)  tension membrane structure
张拉膜结构
1.
The form-finding analysis for the beam-column-supported tension membrane structures is carried out by the force density method.
用力密度法对梁-柱支承的张拉膜结构进行找形分析。
2.
As a tension membrane structure, its shape and internal forces are coupled with each other.
张拉膜结构是近几十年逐渐发展起来的一种新型的张拉整体结构,在我国正得到日益广泛的应用。
补充资料:拉深模的结构形式与设计
拉深模是把坯料拉压成空心体,或者把空心体拉压成外形更小而板厚没有明显变化的空心体的冲模。 
  拉深模结构形式

  1.第一次拉深工序的模具(表1)
  2.后续拉深工序的模具(表2)
 


 

  3.反拉深模  将工序件按前工序相反方向进行拉深,称为反拉深。反拉深把工序件内壁外翻,工序件与凹模接触面大,材料流动阻力也大,因而可不用压料圈。图1是反拉深示例。图2示反拉深模,凹模的外径小于工序件的内径,因此反拉深的拉深系数不能太大,太大则凹模壁厚过薄,强度不足。

 

  4.变薄拉深模  变薄拉深与一般拉深不同,变薄拉深时工件直径变化很小,工件底部厚度基本上没有变化,但是工件侧面壁厚在拉深中加以变薄,工件高度相应增加。变薄拉深凹模的形式见表3。变薄拉深凸模的形式见表4。
  图3示变薄拉深模,凸模下冲时,经过凹模(两件),对坯件进行二次变薄拉深,凸模上升时,卸料圈拼块把拉深件从凸模上卸下。

 


 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条