说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> VN三分仓回转式
1)  VN three partition rotary air preheater
VN三分仓回转式
2)  Ljungstrom regenerative air heater
容克式三分仓回转空气预热器
3)  three sectional regenerative air preheater
三分仓回转式空气预热器
4)  trisector [trai'sektə]
三分仓
1.
To tackle the air leakage problems of trisector rotary air preheater in a comprehensive way;
三分仓回转式空气预热器漏风综合治理
2.
The problem that the primary air leakage of trisector AH is large arises some domestic customer s attention.
三分仓空气预热器一次风泄漏量偏大,引起国内部分用户的反响。
5)  tri-section
三分仓
1.
As an example,the thermal check calculation was carried out according to the practical operational parameters of a tri-sectional regenerative air heater with separated cold and hot sections of a 220 MW boiler unit.
根据回转式空气预热器的工作机理,通过理论分析,把金属蓄热元件视为某一假想的流体,将非稳态传热与金属蓄热元件的机械运动等同于稳态换热过程,采用控制容积法建立了回转式空气预热器的流体动力学传热微分方程组与对应的差分方程组,详细给出了数值解法的计算过程,并以某220 MW锅炉机组的三分仓冷、热分段回转式空气预热器为例,结合实际运行参数进行了校核热力计算。
2.
Based on tri-section regenerative air preheater\'s characteristics,build on heat transfer model and heat transfer equation to calculate.
针对三分仓回转式空气预热器的自身特点,建立其传热模型和传热方程式来进行计算,通过对不同物性传热元件进行计算,发现对于回转式空气预热器,材质物性对传热特性的影响不大,但受热面污染会使回转式空气预热器空气出口温度及受热面壁温下降。
3.
Based on the standard thermodynamic calculation method of dual-section regenerative air preheater,a heat transfer calculation model of tri-section regenerative air preheater has been deduced,at the sametime,the method for finding solution and the program of thermodynamic calculation being given.
基于两分仓回转式空气预热器热力计算标准方法,建立了三分仓空气预热器换热计算模型,同时给出了计算求解方法与热力计算程序。
6)  three compartment bi
三室式斗仓
补充资料:Tfh-vn-1050式头盔
tfh-vn-1050式头盔
tfh-vn-1050式头盔

产品名称: 特克诺tfh系列头盔

tecno tfh series of helmet

生产单位:意大利特克诺纤维公司

tecno fibre spa, it

现状:生产

用途:防杀伤破片和枪弹


概 述

意大利特克诺纤维公司生产的tfh系列头盔,包括tfh-a-1600式、tfh-a-1800式、 tfh-a-2000式、tfh-vn-1050式、tfh-vn-1200式、tfh-vn-1600式和tfh-fm-2000式七种型号。其中tfh-a式是工兵防弹头盔,tfh-vn式是防杀伤破片头盔,tfh-fm式是防弹和防杀伤破片头盔,它们都可防各种杀伤破片和枪弹对头部的伤害。

结构特点

tfh-a-1600式、tfh-a-1800式和tfh-a-2000式工兵防弹头盔,由盔壳、防弹织物、缓冲内衬垫层和护带以及下巴托组成。盔壳是用合成材料制成的,防弹织物是用热固树脂浸渍过的凯夫拉材料织成的,缓冲内衬垫层是用海绵材料制成的。

tfh-vn-1050式、tfh-vn-1200式和tfh-vn-1600式防杀伤破片头盔的盔壳是用多层玻璃纤维和热固树脂浸渍过的防弹尼龙制成的。头盔内加有减震用内衬垫层。头盔设有下巴托和扣环,用于固定头盔。

tfh-fm-2000式防弹和防杀伤破片头盔的盔壳用钢和热固树脂浸渍过的凯夫拉材料制成,缓冲内衬垫层用海绵材料制成,设有下巴托和固定头盔的系带。

性能数据

型号 质量 可防枪弹类型/速度

tfh-a-1600式 1.30kg 1.1g杀伤破片/488m/s

tfh-a-1800式 1.40kg 枪弹/548m/s

tfh-a-2000式 1.50kg 枪弹/610m/s

tfh-vn-1050式 850g 1.1g杀伤破片/320m/s

tfh-vn-1200式 1.05kg 杀伤破片/360m/s

tfh-vn-1600式 1.50kg 杀伤破片/470m/s

tfh-fm-2000式 1.60kg 1.1g杀伤破片/610m/s

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条