说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 受弯构件
1)  flexural member
受弯构件
1.
Calculation of carrying capacity of the normal section of a RC flexural member with round section;
钢筋混凝土圆截面受弯构件正截面承载力计算
2.
Simplified method of reinforcing the grouted concrete flexural members;
现浇钢筋混凝土受弯构件加固补强简易方法
3.
Simplied calculation to the minimum reinforcement ratio of flexural members to be content crack;
满足裂缝要求的受弯构件最小配筋率的简化计算
2)  bending member
受弯构件
1.
Evaluation of strengthening of bending member by early loading;
初始荷载对受弯构件加固性能的影响评价
2.
Thoughts on the partial revisions of bending member s overall stabilization in new steel code;
新钢规中受弯构件整体稳定部分条文修订分析
3.
The right section strength calculation of bending member using “ratio method”;
用比例法进行受弯构件正截面强度计算
3)  flexural members
受弯构件
1.
Control of crack width in reinforced concrete flexural members;
钢筋混凝土受弯构件裂缝宽度控制
2.
Deflection of preflex prestressed concrete flexural members;
预弯预应力混凝土受弯构件的挠度计算
3.
Experimental study on behavior of cold-formed steel flexural members with thickness less than 2mm
壁厚2mm以下冷弯薄壁型钢受弯构件性能试验研究
4)  member in bending
受弯构件
1.
Local critical buckling stress of the cross-section of member in bending with high-strength cold-formed steel;
高强冷弯型钢受弯构件截面局部屈曲临界应力
2.
The determination and application of theoretical point of cutting about reinforced concretes longitudinal tensile bar of member in bending;
钢筋混凝土受弯构件纵向受力钢筋理论断点的确定及应用
3.
Combined with practical work the construction method and calculation steps of carbon fiber sheet in reinforcement treatment of concrete member in bending are introduced.
通过工程实例具体说明采用碳纤维布加固混凝土受弯构件的具体方法和计算步骤,分析了碳纤维布加固混凝土受弯构件的适用条件,以推广该技术。
5)  beam [英][bi:m]  [美][bim]
受弯构件
1.
Fatigue behavior of reinforced concrete beams strengthened wit hprestressed carbon fiber reinforced polymer plates
预应力碳纤维板加固受弯构件的疲劳性能研究
2.
Discussion on the method for calculating crack width of partial prestressed concrete beams
部分预应力混凝土受弯构件裂缝宽度计算方法探讨
3.
Based on the experiment of eight steel-reinforced light-weight concrete beams and two steel-reinforced concrete beams,the opening and distribution of cracks are studied and a comparison with two different aggregates has been made to find out wider cracks for light-concrete beams with smaller variations.
通过对8根钢骨轻骨料混凝土梁和2根钢骨普通混凝土梁的试验,研究了钢骨轻骨料混凝土受弯构件在单调荷载作用下的裂缝开展与分布情况。
6)  deep flexural member
深受弯构件
1.
Prediction of shear capacity of prestressed concrete deep flexural members based on modified strut-and-tie model;
基于改进拉-压杆模型的预应力混凝土深受弯构件受剪承载力预测
2.
Mechanic properties of deep flexural member and its calculation and construction in codes;
浅谈深受弯构件受力特点与规范计算构造
3.
Shear resistance for reinforced concrete deep flexural member;
钢筋混凝土深受弯构件受剪承载力分析
补充资料:长春冷弯型钢总厂生产的异形冷弯型钢


长春冷弯型钢总厂生产的异形冷弯型钢


  长春冷弯型钢总厂生产的异形冷弯型钢
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条