说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 钢板剪力墙
1)  steel plate shear wall
钢板剪力墙
1.
Cyclic test of thin steel plate shear wall with slits;
开缝薄钢板剪力墙低周反复荷载试验研究
2.
Elastoplastic shear bearing capacity analysis of steel plate shear walls;
钢板剪力墙的弹-塑性抗剪承载力分析
3.
Experimental investigation and simulation analysis of new steel plate shear walls with slits;
新型带缝钢板剪力墙的试验研究及其数值模拟
2)  steel plate shear walls
钢板剪力墙
1.
Study on mechanical property of steel plate shear walls;
钢板剪力墙力学性能研究
2.
The steel plate shear walls with two-side connections and the steel- concrete composite shear walls with two-side connections that are connected only with frame beams by high-strength bolts or welding seams, possess the following advantages over the shear walls with four-side connections: They can reduce the reliability on frame columns and thus prevent the premature failure of columns.
两边连接钢板剪力墙和钢板混凝土组合剪力墙通过高强螺栓或焊缝仅与框架梁连接,与四边连接钢板及组合剪力墙相比消除了对框架柱的依赖,避免了框架柱过早发生破坏;小跨高比的两边连接剪力墙布置灵活,可以在一跨中分段布置,便于开设门窗和过道,通过调整墙板尺寸或数量,方便地改变剪力墙的刚度和承载力。
3)  steel shear wall
钢板剪力墙
1.
Seismic response analyses of frame structure with slit steel shear walls;
新型钢板剪力墙钢框架结构的地震响应分析
2.
Basis on the FEM analyses and test study of the slitted steel shear wall, the formulas to estimate the elastic lateral stiffness and shear bearing are deduced in this paper.
本文在带缝钢板剪力墙有限元分析和试验研究的基础上,推导了带缝钢板剪力墙的弹性抗侧刚度估算公式、剪切承载力估算公式,提出带缝钢板剪力墙的理论骨架线和适合工程应用的简化骨架线,得到一些有意义结论。
3.
Based on the FEM analyses and test study of the steel shear wall with slits, the formulas to estimate the elastic lateral stiffness and shear bearing are deduced in this paper.
本文在带缝钢板剪力墙有限元分析和试验研究的基础上,推导了带缝钢板翦力墙的弹性抗侧刚度估算公式、剪切承载力估算公式,提出带缝钢板剪力墙的理论骨架线和适合工程应用的简化骨架线,得到一些有意义结论。
4)  steel-plate shear wall
钢板剪力墙
1.
Shear resistance behaviour of slotted steel-plate shear wall with out-of-plane buckling restrained;
限制出平面屈曲开缝钢板剪力墙抗剪性能
2.
According to a series of advantages, such as convenient operation, good ductility and excellent property of seismic resistance, Steel-plate Shear Wall(SSW) and Steel-concrete Composite Shear Wall(SCSW) are being paid more and more attention in engineering practice.
由于施工快捷、延性好、抗震性能优越等一系列优点,钢板剪力墙(SSW)和钢板-预制混凝土板组合剪力墙(SCSW,以下简称组合剪力墙)作为建筑结构中一种新型的抗侧力构件而受到广泛关注。
3.
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall(SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
5)  steel-plate shear walls
钢板剪力墙
1.
Research of shear resistance static behaviors of steel-plate shear walls with slits;
四边简支开缝钢板剪力墙抗剪静力性能研究
6)  SPSW
钢板剪力墙
1.
Steel plate shear walls (SPSW) as one of the most economical and effective lateral load resisting systems began to emerge since 1970s.
钢板剪力墙结构是二十世纪七十年代开始出现的一种抗侧力体系。
2.
As a new structural system,SPSW is a high lateral stiffness and ductility structure system.
9m的钢结构超高层建筑,主要抗侧力体系采用"钢管混凝土柱框架+核心钢板剪力墙体系+外伸刚臂抗侧力体系"组成。
补充资料:剪力墙
剪力墙
shear wall

   房屋或构筑物中主要承受风荷载或地震作用引起的水平荷载的墙体。防止结构剪切破坏。又称抗风墙或抗震墙、结构墙。分平面剪力墙和筒体剪力墙。平面剪力墙用于钢筋混凝土框架结构、升板结构、无梁楼盖体系中。为增加结构的刚度、强度及抗倒塌能力,在某些部位可现浇或预制装配钢筋混凝土剪力墙。现浇剪力墙与周边梁、柱同时浇筑,整体性好。筒体剪力墙用于高层建筑、高耸结构和悬吊结构中  ,由电梯间、楼梯间、设备及辅助用房的间隔墙围成,筒壁均为现浇钢筋混凝土墙体,其刚度和强度较平面剪力墙高可承受较大的水平荷载。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条