1) Slab quality
铸坯品质
1.
Moreover, the slab quality information can be stored and statistic analyzed by computer model.
为了提高连铸生产过程的质量控制水平,加强铸坯品质的跟踪和管理,在过程控制计算机上建立品质异常把握模型。
2) billet quality
铸坯质量
1.
The latter has advantages of portable and simple configuration,installing and replacing conveniently,long applying-life,effectively improving billet quality,reducing cost and obviously increasing production efficiency of horizontal continuous caster.
整体式拉坯辊装置具有结构轻便简单,安装更换方便,使用寿命长,能有效提高铸坯质量,降低成本及明显提高水平连铸机生产效率等优点。
2.
The key factor of the caster on effect the billet quality are dealt with,main schemes included:rebuild the mold,add M-EMS,design the arc radius,casting speed,tundish,protective casting in whole process and so on,the best technology parameters are obtained by designing and calculating.
为了提高小方坯铸坯质量,本文对小方坯连铸机中影响铸坯质量的主要设备因素展开了讨论与研究,主要方案有:结晶器改造、采用结晶器电磁搅拌、连铸机弧形半径设计、连铸机拉速设计,中间包设计,全程保护浇铸等,通过设计与计算提出最佳工艺参数。
3) bloom quality
铸坯质量
1.
The effect of stirring intensity and twist moment of mould electromagnetic stirrer(M-EMS) on continuous casting bloom quality was investigated.
研究了结晶器电磁搅拌强度及扭矩大小对铸坯质量的影响。
4) slab quality
铸坯质量
1.
Study of Slab Quality on Unsteady Casting Conditions and Liquid Steel Behavior in Mold;
非稳态条件铸坯质量与结晶器钢液行为研究
2.
The EMBR can be used to control the molten steel flow, to reduce the entrapment of mould powder, to eliminate nonmetallic inclusions in the mould, and hence to improve the slab quality and increase the casting speed.
电磁制动技术可以控制结晶器内钢液的流动 ,减少结晶器保护渣的卷渣 ,有利于结晶器内夹杂物的去除 ,从而提高铸坯质量 ,并有利于提高铸坯拉速。
3.
The present paper reviews the development of the magnetic stirring technology and its various patterns and their roles, and analyzes the effects of this technology on improvement of the slab quality and foresees the prospect of development of this technology.
综述了电磁搅拌技术的发展、种类及作用 ,举例说明了电磁搅拌技术对改善铸坯质量的影响 ,并展望了电磁搅拌技术的发展前景。
5) quality of slab
铸坯质量
1.
Measures to control the quality of slab such as the control of stability of liquid steel surface in mold,oscillation and the marks of oscillation as well as the control of liquid steel flow were also presented.
介绍了南京钢铁集团有限公司新建宽板坯连铸机的主要设备技术参数和技术特点,论述了连铸坯质量控制的工艺措施,如结晶器内钢液面稳定控制,振动与振痕控制,钢水流动控制等。
6) strand quality
铸坯质量
1.
This paper analyzes measures for controlling strand quality after cross-section adjustment of the No.
从工艺、设备改造角度分析了型钢3#板坯连铸机在断面调整后的铸坯质量控制方面采取的措施。
2.
Having functions of purification, solidification, heat exchange and chemical reaction, continuous casting mold is the important chain of strand quality control and the key part influe.
连铸结晶器具有净化、凝固、换热和化学反应等多种功能，是控制铸坯质量的重要环节，也是影响钢液流动和凝固传热的关键部位。
3.
The friction compensation model is adopted, to correct the non-sinusoidal oscillation curve, achieve meniscus shape optimizing, and improve strand quality.
但铸坯与结晶器之间摩擦力的存在,造成了非正弦振动曲线的失真与变形,采用摩擦力补偿模型,可以实现对非正弦振动曲线的修正,达到优化弯月面形状的目的,从而改善铸坯质量。
补充资料：衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
衡阳钢管厂水平连铸机生产连铸圆管坯
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条