说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 地质力学模型
1)  geomechanical model
地质力学模型
1.
Experimental study of 3d geomechanical model on global stability of an arch dam under complex geological condition;
复杂地质条件下拱坝整体稳定三维地质力学模型试验研究
2.
Aiming at the engineering geological problems of the Dagangshan arch dam,by three-dimensional geomechanical model test,the whole failure process and mechanism of the arch dam and abutments from loading to failure are studied.
针对大岗山双曲拱坝的工程地质问题,采用三维地质力学模型试验技术,研究坝体和坝肩从加荷到破坏的整个过程和机制。
3.
The technique,method and its application of a geomechanical model used for studying the entire stability problem of high arch dam are discussed.
针对高拱坝的整体稳定问题,阐述了地质力学模型试验研究技术、方法及应用。
2)  geomechanics model
地质力学模型
1.
The foundation stability of the TGP ship lift s upper head is studied by 3D geomechanics model with scale 1∶120.
用三维地质力学模型试验技术研究了三峡升船机上闸首基础稳定性。
2.
This paper gave a detailed description of the basic engineering geological features of the landslide, summarized a geomechanics model of the landslide to form, and made an analysis of the stability of slope in natural state and rainstorm using limit equilibrium method.
本文详细介绍了芭蕉树滑坡的基本工程地质特征,并由此概化出滑坡形成的地质力学模型;应用极限平衡法对天然状态及暴雨状态下斜坡的稳定性进行了分析研究。
3)  geomechanical model test
地质力学模型
1.
With the method of combination of overload method and strength-decreasing method, the geomechanical model test on the stability of abutment is applied in this paper, and combined with the concrete double arch dam in Sichuan province.
结合四川宝兴河铜头水电站混凝土拱坝,对坝肩稳定进行了三维地质力学模型试验研究,试验中采用变温相似材料模拟坝肩坝基岩体中的软弱结构面,运用超载与强降相结合的方法进行破坏试验。
2.
In Connection with three dimensional geomechanical model testing for Shapai RCC arch dam abutment stability study,this paper mainly analyses the differences & similarities between the test results of the synthetical method & overloading method as well as applicability of these test results.
结合沙牌RCC拱坝坝肩稳定三维地质力学模型试验,着重分析了综合法与超载法所得试验成果的异同及其成果的实用性,探讨了由两种试验方法求得的安全系数间的相互关系。
4)  geological mechanics model
地质力学模型
5)  geo-mechanical model
地质力学模型
1.
Aiming at the geologic and topographical condition of a high slope at the left bank of Jinping-1 hydropower project,a geo-mechanical model test is conducted.
针对锦屏一级水电站左岸1960m高程以上边坡的地形地质条件,采用地质力学模型试验的方法,利用超载法进行破坏试验研究,定性掌握边坡变形破坏的全过程,定量分析边坡的变形和应力变化情况;探明了边坡变形破坏的趋势,得出了边坡基本稳定的结论。
2.
In the light of 3D geo-mechanical model testing for Shapai RCC arch dam abutment stability study,two different schemes for overall method in the failure test are analyzed.
结合沙牌RCC拱坝坝肩稳定三维地质力学模型试验,就破坏试验中的综合法进行了两种不同方案的研究:一是先在正常荷载下超载1。
6)  engineering geological mechanical model
工程地质力学模型
1.
Based on the engineering geological characteristics of the compositely structured overburden with weakness and weathering,the failure of the overburden and ground movement and deformation during coal mining were characterized by applying comprehensive research method combining engineering geological mechanical model test and finite element numerical simulation.
首先分析了研究区煤矿山西组煤层剖面和水文地质特征,针对软弱风化复合结构覆岩的工程地质特征,采用工程地质力学模型实验、数值模拟计算相结合的综合研究方法,分析了煤层开采覆岩破坏规律与地表移动变形特征,计算了不同煤层采厚垮落带与导水裂隙带的发育高度,对煤层安全开采影响程度进行了评价,针对性地提出了相应的防治水措施,并经过开采验证,避免了水害发生。
补充资料:地质力学模型试验


地质力学模型试验
model test of geome-chanics

  d一zh一l{xue mox旧9 sh一yon地质力学模型试验(model test of geo-mechanics)根据力学相似和几何相似原理,以模拟材料制成模型,进行岩体力学试验的实验技术。通过侧量加载下模型的应力和变形,研究坝基、地下洞室、边坡等岩体的应力分布和破坏形态及其对工程结构的影响,为工程设计和施工提供依据。岩体模型有结构模型(包括脆性材料模型和光弹性模型)和岩体地质力学模型两类。岩体模型试验成果受许多因素影响,其中模拟材料的选择与制作工艺是决定性因素,其次试验设备与测试仪器、试验程序和方法、试验室的温度与湿度等均属不可忽视的条件。 结构模型试验 (l)脆性材料模型试验。常用石膏、砂、硅藻土、浮石、水泥等材料,按静力相似律要求,配制质地均匀、性能稳定和易于加工的模型材料制作模型,放在试验架上进行试验。在试验过程中利用各种测量元件量测各侧点的应力或变形。近年来已有应用激光散斑技术测量岩体模型的全场变形的方法。 (2)光弹性模型试验。用具有光学灵敏性的材料(如赛璐路、明胶、环氧树脂等)制成模型,放在光弹仪上,利用双折射效应和偏振光原理,将模型受力变形所产生的干涉条文(即等色线和等倾线)测出,从而可算出模型内各点的应力。光弹性模型试验又可分为光弹性应力冻结法和全息光弹性法。 地质力学模型试验模拟带控制岩体力学性质的各种地质构造面(如节理、断层、软弱夹层等)岩体模型,测定模型受力时的应力和变形,研究其破坏形态和机制。它能较直观地为工程设计和岩体加固处理提供合理依据,尤其适于查明地下洞室开挖顺序影响和洞群合理布置。它是非均质不连续岩体强度理论研究的一条重要途径。制作地质力学模型时要选择重量大、弹性模量低的材料,通常选用重晶石粉、铅丹、石英砂和铁粉等为骨料.以硅藻土、膨润土为掺合料。块体间摩擦可以塑料薄膜、纸或甘油模拟,断层充填物用石膏、淀粉、软胶等材料。对喷锚支护的地下洞室模型,常以铅丝、铜丝、铝丝和竹等材料模拟锚杆,以石膏、乳胶水等模拟喷层。模型相似律与脆性材料模型相同,并要求模型与原型的应变和摩擦系数尽可能一致。 目前多用平面模型试验,将模型安置在试验架上,以橡皮囊装满液体(水或水银)施加面力,也可用小千斤顶分块施加集中力代替。自重应力由模型材料自重形成。以千分表或其他应力和应变传感器布置在模型表面或内部量测试验过程中的应力和应变。对砌块模型的两侧常以有机玻璃板夹住,以防失稳,但要采取相应的减摩措施。 试验时按要求加载或开挖洞室,并测量模型各测点的变位,观察模型的破坏形态。通常以位移与时间曲线上的突变点为控制点,取超载安全系数作为评价岩体稳定的标准。
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条