1) Multi-feeder
多点进料
2) Position to throw the waste
进料点
3) step feed
多点进水
1.
Based on the change of receiving water body function and short- and long-term discharge standards of the WWTP, an optimized wastewater treatment process with pool sharp characteristic of oxidation ditch, improved A/A/O process feature and step feed was put forward, and a good technical foundation for the effluent utilization was laid.
菏泽污水处理厂的设计过程历经污水处理厂出水排放标准的更新演变,结合受纳水体功能的改变、近远期污水处理厂出水排放标准的变化,提出了具有氧化沟池型特征、改良A/A/O工艺特点、多点进水的污水处理优化工艺,并为尾水的利用奠定了良好的技术基础。
2.
The step feed plus reversed A2/O biological treatment process is adopted in the first-stage project of Shanghai Volkswagen Jiading Wastewater Treatment Co.
上海大众嘉定污水处理有限公司一期工程采用多点进水倒置A2/O工艺,介绍了工艺流程、各处理单元的设计参数及运行经验。
4) multi-point entrance
多点进出
5) feeding raw materials from more than one places
多点加料
1.
It can reduce the temperature of the reduction reaction, shorten the reduction periods and eliminate MgCl2 in titanium sponge by using the technology of feeding raw materials from more than one places in the large-scale reactor.
而在大型反应器中采用多点加料工艺,可以降低还原反应温度,缩短还原周期,消除夹心氯化镁的存在,为提高海绵钛的产量和质量,提供了一条切实可行的生产途径。
6) point gate feeding
点浇口进料
1.
For the injection mold structure of transparent plastic cover shell, point gate feeding is adopted.
对透明塑料罩壳注射模结构,采用点浇口进料。
补充资料：ZHK系列真空进料快速混合机
工作原理
本机采用真空的方式加料，容器不断旋转，物料在内部得以混合完全。本机按GMP要求设计，安全、高效。
应用范围
医药、化工、食品、冶金等待业进行粉粒状物料的混合。
技术参数
规格/项目 | 总容积 | 工作容积 | 积料 | 投料转速 | 动力 | 回转高度 | 重量 |
L | L | kg | rpm | kw | mm | kg | |
0.05 | 50 | 20 | 12 | 25 | 0.4 | 900 | 260 |
0.15 | 150 | 65 | 40 | 22 | 0.55 | 1300 | 350 |
0.3 | 300 | 145 | 90 | 20 | 0.75 | 1700 | 600 |
0.5 | 500 | 210 | 130 | 18 | 1.5 | 1840 | 700 |
1 | 1000 | 425 | 250 | 15 | 3 | 2030 | 1800 |
1.5 | 1500 | 700 | 420 | 15 | 4 | 2300 | 2300 |
2 | 2000 | 800 | 480 | 14 | 5.5 | 2490 | 3400 |
3 | 3000 | 1250 | 750 | 13 | 5.5 | 2850 | 4250 |
4 | 4000 | 1850 | 1100 | 11 | 7.5 | 3200 | 5500 |
5 | 5000 | 2300 | 1400 | 8 | 7.5 | 4600 | 6000 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条