1) wear degree
磨损程度
1.
In addition,on the stagger arrangement condition,principle of transversal pitch selection and the difference in each column fin tube wear degree that induced by the different transversal pitch was also studied.
分析了翅片几何参数选取的不同对抗磨性能与换热的影响;此外,还研究交错排列情形下,横向节距的选取原则,以及不同的横向节距对每列翅片管磨损程度的差异。
2) wear degree predicting
磨损程度预测
3) wear equation
磨损方程
4) wear process
磨损过程
1.
During the wear process of the clad coatings,the mechanically mixed layer (MML) were formed on the clad coatings when the SiC_p particles asperities cutting against the grinding wheel.
磨损过程中,该熔覆层中的SiCp颗粒微凸体对磨轮的切削产生的切屑,在熔覆层表面形成机械混合层(MML),此机械混合层硬度较高,耐磨性好,使熔覆层在磨损过程中经历了较长距离的磨损孕育阶段,从而改变了铝合金的磨损过程,延缓了中等磨损向严重磨损的转变。
2.
The change rules of the wear rate of rubber under the condition of a line contact in wear process are investigated,it shows that the wear rate of the rubber abrasion during initial stage is increased with the wear travel,after a certain stage the wear rate is constant and reaches to the steady stage of wear.
研究了天然橡胶、丁苯橡胶和丁腈橡胶在线接触条件下磨损过程中磨损率的变化规律，发现橡胶材料在磨损初期的磨损率随摩擦行程增大而增大，到达一定阶段后磨损率保持不变，进入稳定磨损阶段。
5) abrasion course
磨损历程
1.
Aimed at the abrasion of pins,some experiments were carried out and the abrasion course was analyzed,the abrasion course of pins is the breaking-in,the abrasion wear and adhesive abrasion.
通过大量试验,分析了装载机销轴磨损的历程,表明销轴的磨损历程主要分为磨合阶段、磨粒磨损阶段和粘结磨损阶段。
6) wear
[英][weə(r)] [美][wɛr]
磨损过程
1.
This paper describes the deficiencies ofseveral popular modeling methods used in the normalwear trend modeling and presents a normal wear trendmodeling method based on Genetic Algorithms (GA).
分析了几种常见建模方法在正常磨损过程趋势建模中的不足,提出了基于遗传算法的正常磨损过程趋势建模方法。
补充资料：保险保障程度
保险保障程度
【保险保障程度】企业在风险管理决策，选择保险方式时必须评估的企业的实际财务状况及最大可能损失额。它便于对保险实行不同程度、不同范围的选择。一般可分为必须保险保障、必要保险保障和一般保险保障。 必须保险保障主要是对需要强制保险的项目和预期损失非常严重的标的进行保险。 必要保险保障是对那些可能严重损害企业经营、造成严重的损失后果，但不致于使企业破产或倒闭的损失提供保障。 一般保险保障是为上述两类没有提供的所有种类的可保风险提供保险保障。这类损失不致于给企业带来严重影响，但在一定的程度上给企业生产经营带来不利。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条