1) quasi-sliding mode control
准滑模控制
1.
In this study,a new quasi-sliding mode control method with static state output feedback has been applied for seismically excited building structures.
为了较好地解决有限状态输出反馈条件下建筑结构滑模控制系统过大的抖振,提出了含饱和函数的指数趋近律形成的控制律和含继电特性连续函数的指数趋近律形成的控制律,基于这两种控制律,采用有限状态输出反馈的准滑模控制方法对地震作用下建筑结构的振动控制问题进行了研究。
2.
Therefore we propose new quasi-sliding mode control laws that can not only reduce seismological response but can also avoid undue chattering effect.
基于这两种控制律,采用准滑模控制方法对地震作用下建筑结构的振动控制问题进行了研究。
3.
It is difficult to determine the sliding coefficient and bound layer of the quasi-sliding mode control(QSMC) due to lack of some clear relations.
准滑模控制的滑模系数和边界层的选取因缺乏明确的关系式而难以确定,该文以相变量系统模型为基础,详细分析了准滑模控制方法的特性和在Buck变换器控制中的应用;研究了准滑模控制的边界层、滑模系数、准滑动模态区相互之间的定量数学关系,所获得的研究结果可以指导我们有效的选取滑模系数和边界层厚度。
2) quasi sliding mode control
准滑模控制
1.
The problem of quasi sliding mode control for a class of discrete nonlinear systems with input lag is studied in this paper.
研究一类具有输入滞后的离散非线性系统的准滑模控制问题 。
2.
For ordinary uncertain nonlinear systems, a scheme of quasi sliding mode control based on a fuzzy neural networks of inverse dynamics is proposed, the control could be obtained through the feedforward inference of the fuzzy neural networks.
针对不确定非线性系统 ,提出了基于动态逆模糊神经网络的准滑模控制 ,控制量可直接由一个模糊神经网络的前向推理得到 。
3) quasi-sliding mode variable structure control(QSMVSC)
准滑模变结构控制
1.
A quasi-sliding mode variable structure control(QSMVSC) based on fuzzy scheduling boundary was developed and applied to the positioning control of a hydraulic servo system.
提出一种基于边界层模糊调节的准滑模变结构控制方法。
4) Sliding Mode Control
滑模控制
1.
The Study on Sliding Mode Control Technique in Ultra - precision Manufacturing Servo System;
超精密加工伺服系统滑模控制技术研究
2.
Backstepping sliding mode control of coordinated motion of attitude-controlled free-floating space-based robot system;
姿态受控漂浮基空间机器人系统协调运动的反演滑模控制
3.
Fuzzy sliding mode control approach to mass moment interception missile based on dynamic inversion;
基于动态逆的质量矩拦截弹模糊滑模控制
5) sliding control
滑模控制
1.
Design of sliding controller for flight simulator servo system;
飞行仿真转台伺服系统滑模控制器设计
2.
There is proposed an adaptive sliding controller in task space on the base of the linear Newton-Euler dynamic equation of motion platform in a six-DOF flight simulator.
本文使用Newton-Euler法推导了六自由度飞行模拟器运动平台完整的线性化形式的动力学方程,并以此为基础,提出了一种在任务空间中的非线性自适应滑模控制方法。
3.
The architecture employed fuzzy systems to approximate nonlinear function which includes fault function,uses fuzzy sliding controller to compensate for the fuzzy approximation error,through altering the structure of controller to compensate for the influence due to actuators fault,Global asymptotic stability was established in the Lyapunov sense,with the tracking errors converging to .
利用模糊逻辑系统来逼近未知函数包括故障项,用滑模控制补偿模糊逼近误差,通过改变控制器结构来补偿执行器故障所带来的影响,同时基于Lyapunov方法进行了稳定性分析。
6) sliding model control
滑模控制
1.
Study of linear motor speed loop based on model reference adaptive sliding model control;
基于模型参考自适应滑模控制的直线电机速度环研究
2.
Model reference sliding model control for systems with backlash-like hysteresis;
类反斜线回滞系统的模型参考滑模控制
3.
The Application of Sliding Model Control in the Pneumatic Position Servo System;
滑模控制在气动位置伺服系统中的应用
补充资料：滑准税
滑准税（SlidingDuties），又称滑动税，是对进口税则中的同一种商品按其市场价格标准分别制订不同价格档次的税率而征收的一种进口关税。其高档商品价格的税率低或不征税，低档商品价格的税率高。征收这种关税的目的是使该种进口商品，不论其进口价格高低，其税后价格保持在一个预定的价格标准上，以稳定进口国国内该种商品的市场价格，而不受国际市场影响。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条