1) Combustion parameter
燃烧参数
1.
Combustion parameters were studied from a turbocharged inter-cooled diesel engine under constant speed and increasing torque(CSIT)operating conditions with combustion analyzer.
为了研究车用增压柴油机瞬态工况下燃烧参数的变化规律,利用燃烧分析仪在试验台上研究了恒转速变转矩瞬态工况下,油门开度变化率对燃烧参数的影响规律。
2.
Based on experience gained in designing and operation, the paper presents a short description of operational adjustment of principal combustion parameters of circulating fluidized bed boilers with the help of a high temperature cyclone seperation device for the segregation of gases and solids.
该文根据设计和运行经验，简单介绍了用高温旋风分离器作气固分离装置的循环流化床锅炉主要燃烧参数的运行调整。
2) combustion reference
燃烧学参数
1.
Based on tranditional combustion calculation principle and theoritical analysis, a calculation method on combustion references is presented in this paper to approch mix-combustion with multi-fuel under normal condition.
文章根据经典的燃烧学参数计算方法 ,通过对混烧技术的理论分析 ,提出一种适用于常见燃烧条件下多燃料混合性燃烧工程实际的燃烧学参数计算方法。
3) combustion characteristic parameters
燃烧性参数
1.
The combustion characteristic parameters,namely the ratio between area of smoke temperature net rising curves apices per unit mass fuel in flaming stage and ignition time,were put.
为比较植物的燃烧性,用自行设计的燃烧试验装置对4种杨梅科植物和2种易燃的对比植物的鲜枝叶进行了燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等的基础上,提出了植物的燃烧性参数P,即单位质量可燃物在有焰燃烧阶段产生的烟气净温升峰面积与引燃时间之比。
2.
The combustion characteristic parameters were put forward based on lighting time,smoke temperature and weight losing in flaming stage.
为比较植物的燃烧性,用自行设计的燃烧试验装置对20种园林绿化植物的鲜枝叶进行燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等的基础上,提出了植物的燃烧性参数P。
3.
The combustion characteristic parameters, namely the ratio between area of smoke temperature net rising curves apices per unit mass fuel in flaming stage and ignition time, were put forward based on lighting time, smoke temperature and weight losing in flaming stage.
用自行设计的燃烧试验装置对昆明地区25种木本植物的活枝叶进行了燃烧试验,在测定和分析样品引燃时间、有焰燃烧阶段烟气温度变化和质量损失过程等基础上,提出了植物的燃烧性参数,即单位质量可燃物在有焰燃烧阶段产生的烟气温升峰面积与引燃时间之比。
4) HCCI Combustion Parameter
HCCI燃烧参数
1.
In order to implement close-loop feedback control of HCCI gasoline enginea,new thought of extracting HCCI combustion parameters from knock sensor signal was presented.
在装有全可变气门系统的汽油HCCI发动机上,测取了大量HCCI工况下爆震传感器信号;应用快速傅里叶变换,用时频分析的方法,从时域和频域提取表征爆震信号强度及相位的特征量,并对它们和HCCI燃烧参数之间的相关性做了量化比对。
5) combustion property
燃烧特性，燃烧参数
6) burning performance parameter
燃烧特性参数
1.
The burning performance parameters include fuel consumption, apparent atom ratio of hydrogen to carbon and air consumption.
在一维燃烧管室内模拟实验装置平台上分别对火烧油层热力采油过程的干式向前和湿式向前燃烧工艺进行了研究 ,确定了在这两种工艺条件下油样的燃烧特性参数 (燃料消耗量、视氢碳原子比和空气需要量等 )、燃烧前缘推进速度和原油采收率等 ,计算了空气 /原油比、氧气利用率等指标。
补充资料：沸腾床燃烧(见流化床燃烧)
沸腾床燃烧(见流化床燃烧)
boiling-bed combustion:see fluidized-bed combustion
沸腾床燃烧(boiling一bed eombustion)见流化床燃烧。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条