1) combination disk spring
组合碟簧
1.
Based on the actual structure and specific working character of disk spring,experimentation was done on combination disk spring and the process of continuous load as well as load—unload of congruent disk spring was imitated with nonlinear explicit algorithm of the finite element software ANSYS/LS—DYNA.
从碟簧的实际结构特征和具体工作特点出发,对组合碟簧进行静刚度试验测试,并利用有限元软件ANSYS/LS—DYNA的非线性显式算法进行计算,对叠合碟簧的连续加载以及加载—卸载过程进行数值模拟,得到碟簧的载荷位移关系曲线。
2) dish springs
碟簧组
3) disk spring
碟簧
1.
Development of CAD/CAM integrated system of the disk spring based on AutoCAD R12;
基于AutoCADR12平台下的碟簧CAD/CAM集成系统的开发
2.
The dynamic characteristics of disk spring taking account of effect of static load,nonlinear restoring force and combined Coulomb and viscous damping are presented.
详细研究了考虑静力载荷影响、具有弹性非线性和 Coulomb摩擦阻尼非线性的碟簧元件的动力学特性。
3.
Failure analysis for a cracked disk spring was carried out through chemical composition analysis,hardness test,metallograph observation,fracture analysis and EDAX.
通过对断裂碟簧的化学成分、硬度、金相、扫描电镜和能谱分析,指出了非金属夹杂物,特别是硫化物含量偏高,以及严重的带状组织,阻断了组织的连续性,是产生裂纹的主要原因。
4) disc spring
碟簧
1.
Research and Development of Integrated Intelligent Design System for Disc Spring;
碟簧集成智能化设计系统的研究与开发
2.
This paper discusses the design and analysis of disc spring with large deformation.
以有限元软件ANSYS为分析工具,作出了大变形碟簧的刚度曲线。
3.
The traditional design for disc spring in micro-displacement giant magnetostrictive actuator is entirely based on its size, the magnitude of pre-stress as design target, regardless of specific magnetostriction characteristic, making full use of disc spring deformation principle under press.
在传统的超磁致伸缩微位移致动器碟簧设计中,以预压力大小作为唯一设计指标。
5) plate spring
碟簧
1.
It is proved by experiment that the system output can be visibly improved by reducing spring stiffness and therefore, according to precompression and relative conditions, the plate spring data should be designed to make the curve \%f-x\% as poss.
本文对磁致伸缩换能系统弹簧的特点、作用进行了系统地分析与讨论 ,指出了阶跃段磁致伸缩力 Fm 与位移 X存在线性关系 ,并通过试验证明了减小弹簧刚度可明显改善系统输出 ,针对不同预压力及相关条件设计碟簧参数 ,使 f - x曲线尽量平直。
6) combined spring
组合弹簧
1.
Flexible the model of a paratactic combined spring is precise via simulating in Pro/Engineer3.
0对具有挠性的螺旋并列式组合弹簧进行模拟,得到的组合弹簧三维实体模型精确,与实际组合弹簧在力学性能极其接近。
2.
In this paper, we investigated the suspension damping system with variable-stiffness combined spring and its control algorithm, then designed a novel damping system consisting with variable stiffness combined spring based on vibration and active control theories.
本文根据振动及主动控制理论,对基于变刚度组合弹簧的悬架减振控制系统及其控制算法进行了深入的研究,设计了一种新型的变刚度组合弹簧减振系统,主要包括以下三个部分:首先,建立非线性变刚度组合弹簧的等效模型,进行等效刚度计算。
补充资料：组合模式或组合振动
分子式：
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
CAS号：
性质：在红外光谱中通常出现很多的弱吸收，组合模式或组合振动系指对应于两个或多个基本振动频率之和起源，它的弱吸收于多原子分子振动态相互作用的振子的非谐性。与基频振动及倍频所引起的吸收相比，这些吸收是比较弱的。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条