说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 注浆临界压力
1)  mortaring critical pressure
注浆临界压力
2)  critical pressure
临界压力
1.
New theory in the front of theoretical basis research of molecular thermodynamics 4: on molecular structure of organic compound and theoretical equation of critical pressure;
分子热力学前沿基础领域中的新理论4:论有机纯质的分子结构与临界压力理论方程
2.
Prediction of the critical pressures of alkanes using a quantitative structure property relationship;
应用QSPR方法预测烷烃的临界压力
3.
The critical pressure of two spans beams with one end fixed and the other hinge joined;
一端固支一端铰支二跨梁屈曲的临界压力
3)  critical load
临界压力
1.
The curvature formula of tiny curved rod,together with the vector method of area,is applied to inference for Euler formula about critical load of slender compressive rod which one end is fixed and another is free.
利用杆件微弯的曲率公式和面积向量法,求得一端固定、一端自由压杆的临界压力欧拉公式,为该约束条件下细长压杆的临界压力公式推导提供了另一种方法。
2.
And then,the equations are applied to inference for Euler formula about critical load of slender compressive rod with common constraints.
利用细长压杆微小弯曲的平衡条件和曲率计算公式,得到了统一的压杆转角方程和挠曲线方程,并将其用于几种常见支承条件的细长压杆,方便地求得了相应压杆的临界压力欧拉公式。
3.
In elastic mechanics, it is common practice to calculate critical loads in buckle of thin plates by means of double triangle series.
弹性薄板屈曲的临界压力计算,在弹性力学中一般都是采用双三角级数解法,计算过程比较复杂,工程中应用不方便。
4)  grouting pressure
注浆压力
1.
Penetration radius and grouting pressure in fracture grouting;
桩底劈裂注浆扩散半径和注浆压力研究
2.
Study the influence of the proportion of grout and grouting pressure to the.
研究水泥浆液比例与注浆压力对浆液扩散范围的影响。
3.
According to the test results of grouting to mitigate subsidence, the variation law of grouting pressure during grouting is analyzed, including stage of pressure quickly reducing, the pressure burdening stage and the stage of pressure gradually increasing.
根据注浆减沉实验成果,分析了注浆减沉过程中注浆压力的变化规律:压力快速减少阶段、负压阶段和压力递增阶段;探讨了注浆压力P与离层发展速度△V、注浆量Q的函数关系;重点研究了注浆减沉效果的影响因素:地表减沉率r与注浆量、离层内粉煤灰压实体的分布、开采深度、回采工作面宽度、覆岩岩性及结构等主要因素及其关系;通过对覆岩离层动态规律的分析,探讨了提高注浆减沉效果的技术途径,即采用多层位连续注浆技术,优化采煤工作面设计,在负压阶段加大注浆量。
5)  pressure grouting
压力注浆
1.
Discussion of the Pressure Grouting technology in the Mining-Collapse-Area Control of Road Engineer;
压力注浆治理公路工程矿井采空塌陷区技术的探讨
2.
The ways of pressure grouting treatments the quality accident of the pile foundation;
压力注浆处理桩基质量事故的方法
3.
The application of chemical pressure grouting in soft soil foundation treatment;
化学压力注浆在软弱地基加固中的运用
6)  pressure casting
压力注浆
1.
The pressure casting application in an express highway formation disease treating
压力注浆在某高速公路路基病害处理中的应用
2.
The paper mainly states the treatment methods and effects of adopting pressure casting technique to stop the seepage of the water supply structure.
文章主要阐述了压力注浆堵漏新工艺对给水构筑物渗漏的处理方法和效果。
补充资料:压力注浆成型
分子式:
CAS号:

性质:施加一定压力于泥浆的成型方法。将加压力的泥浆通过管道压入模型腔内,经过一定时间,待坯体形成后卸去压力(如单面吃浆的坯体则倒出多余泥浆),开启模型,取出成型坯体。所施压力大小根据产品形状及尺寸而定。采用压力注浆可提高坯体的致密度,减少坯体的残留水分,缩短成型和坯体干燥时间,并可减少半成品开裂,烧成变形等缺陷。日用瓷,建筑卫生瓷及某些特种陶瓷多采用压力注浆成型工艺。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条