1) freezing latent heat
凝固热
1.
On the basis of the trends of surface water temperature in winter and the measured data,a practical and easy-to-use model of surface water temperature in winter is established,and the corresponding relationship of water temperature,air temperature and heat load in surface water heat pump system with freezing latent heat collection is proposed.
在分析冬季地表水温变化趋势的基础上,结合实测数据,建立了符合实际且易于使用的地表水冬季水温模型,并提出了相应的水温-气温-热负荷对应关系,为地表水源采集凝固热热泵系统冬季供热工况的设计与运行提供有益的参考。
2) freezing heat
凝固热
1.
Heat pump systems and equipment exploiting freezing heat from cold water;
利用冷水凝固热的热泵系统与装置
3) heat transfer and solidification
传热凝固
1.
Under conditions of a slab caster and the working tip structure of SEN used,comprehensive mathematical description and simulation concerning fluid flow of liquid steel,fluctuation of bath surface and heat transfer and solidification of steel were performed.
结合连铸机设备工艺条件和所采用浸入式水口结构进行了结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
2.
For CSP thin slab caster at Zhujiang Steel,a comprehensive mathematical simulation concerning fluid flow,fluctuation of bath surface,heat transfer and solidification of melt was performed with given SEN and measured heat fluxes.
基于珠钢CSP薄板坯连铸机设备工艺条件和所采用扁平浸入式水口结构,结合铜板测温导出的热流密度分布进行了漏斗形结晶器内钢水流动、自由液面以及传热凝固等冶金现象的综合描述和数值分析。
4) Solidification and heat transfer
凝固传热
1.
Changeable space FDM for solidification and heat transfer of rectangular billet in continuous casting;
矩形连铸坯凝固传热的变间距有限差分模拟
2.
Numerical simulation of solidification and heat transfer in the mold for the bloom caster in Baotou Iron and Steel Co.;
包钢大方坯连铸机结晶器凝固传热的数值模拟
3.
Research and application of solidification and heat transfer for liquid steel in mould of SPHC;
SPHC连铸结晶器内钢水凝固传热的研究与应用
5) heat transfer
凝固传热
1.
Numerical Simulation and Control of Heat Transfer in Continuous Casting Process;
连铸凝固传热全过程数值模拟与控制
2.
Based on the mathematical model of heat transfer in slab continuous casting process, the MSC Marc is adopted to simulate the temperature field and solidification of continuous casting process, and the result of simulation is analyzed.
在建立板坯连铸凝固传热数学模型的基础上,采用有限元软件MSCMarc对国内某板坯连铸机的凝固过程进行模拟,并对其仿真结果进行分析。
6) solidification heat transfer
凝固传热
1.
The mathematic model of solidification heat transfer process in continuous casting strand is useful for quantitatively analyzing heat transfer in continuous casting process,quality control and process control.
连铸坯凝固传热数学模型对定量分析连铸过程中的热量传递、改善连铸坯质量及实现过程级的动态控制有重要意义。
2.
According to the theory of heat transfer and solidification, we study the solidification heat transfer of dynamic casting process in slab continuous casting.
根据凝固传热理论,对板坯连铸动态拉坯过程中凝固传热进行研究,通过选择合适的拉速、比水量、过热度等工艺参数得到均匀稳定的温度分布,从而可以有效地改善铸坯内部质量。
3.
The mathematic model of solidification heat transfer process in continuous casting strand is useful for quantitatively analyzing heat transfer in continuous casting process,quality control and process control.
连铸坯凝固传热数学模型对定量分析连铸过程中的热量传递、改善连铸坯质量及实现过程级的动态控制有重要意义。
补充资料：凝固热
| 凝固热 solidification，heat of 温度不变时，单位质量某种液相物质在凝固过程中释放的热量。见凝固。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条