说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 工作模型
1)  working model
工作模型
1.
Proposes a working model of OCS wire overloading in factory, which may be applied in the construction of overhead electric line instead of the working model in field.
本文提出一种接触网导线工厂化超拉的工作模型,可以作为现场超拉工作模型的替代方案,应用在接触网工程等架空输电线路的施工中。
2.
The paper makes use of BOOST software of AVL to set up a working model for some type diesel engine,suggests some parameters of working performance,optimizes the relative parameters of the diesel engine.
本文利用AVL公司的BOOST软件建立了某型增压柴油机的工作模型,得到了一些工作性能参数,并对此柴油机的相关参数进行优化计算。
2)  work model
工作模型
1.
The design idea and work model are presented in the paper for the collaborative fault diagnosis system based on CSCW mechanism, and the architecture and key technology are studied for collaborative fault diagnosis system.
文章提出了基于CSCW机制的协同故障诊断系统的设计思想和工作模型,研究了协同故障诊断系统的体系结构和关键技术。
3)  Working cast model
工作模型
1.
When using die stone to manufacture working cast model, we should oper.
超硬石膏制作工作模型时,必须规范操作,严格按照厂家提供的水粉比例调和,才能保证模型的质量。
4)  workflow model
工作流模型
1.
Time performance evaluation approach in workflow models;
一种工作流模型的时间性能评估方法
2.
New algorithm for mining workflow models;
一种新的工作流模型挖掘算法
3.
New user-oriented workflow model;
一种新的面向用户的工作流模型
5)  workflow models
工作流模型
1.
This paper discusses application and implementation method of workflow technology in production planning system based on Web (B/S and C/S structure), analyses production schedule procedure and workflow models using figures of the direction and Petri Nets; finally, analyses system structure of production planning system and function module from the angle of The system realization Under .
探讨工作流技术在基于Web(B/S和C/S结构)的生产计划系统中的应用和实现方法,分析生产计划流程,并对工作流模型进行有向图和PetriNets分析;最后在NETFramework下从系统实现的角度对生产计划系统体系结构、功能模块进行分析,并在此基础上给出了具有敏捷特征的生产计划系统的关键技术及其实现方法。
2.
This paper gives analytic method to analyze the performance of a kind of workflow models that can be nested by four basic workflow models,i.
工作流是近年来网络领域里研究的一个热点 ,对工作流模型的性能分析是工作流研究的一个重要内容 。
6)  workflow modeling
工作流模型
1.
The study of workflow modeling mainly concerns the way to express clearly and accurately business process within actual application and especially the way to formalizing.
一个好的工作流模型是实现一个具有高度灵活性、可靠性、可用性、可伸缩性和互操作性的工作流管理系统的关键和基础。
2.
Aiming at such problemsas inadequate modeling ability,weak adaptability,and dependency of domain existed in current workflow management systems,a new workflow modeling method based on extended Unified Modeling Language activity diagrams and XML Process Definition Language(XPDL) specifications,was put forward.
为了使统一建模语言活动图的工作流模型能适应不同工作流引擎的执行,定义了统一建模语言活动图到可扩展标记语言的过程定义语言的形式化转换规则。
补充资料:AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率

开始
先看下最终效果




第一步,如图所示将窗口分为四个视图




第二步,依次选择每个窗口,在分别输入各自己的视图




第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图




第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:




第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:




第六步:画出螺栓的初步形状.如图




第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算





第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集




第九步:阵列




第10步.模型就完成了




来一张利用矢量处理的图片


说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条