1)  PL3105
PL3105
1.
Research of Powerline Communication Based on PL3105;
基于PL3105的电力线通信研究
2.
THE DATA COLLECT ION TERMINAL OWING TO THE PL3105;
基于PL3105的数据采集终端设计
3.
The modules of control and communication based on the power line carrier communication chip-PL3105 in the intelligent home control are introduced,using PL3105 as core unit,the design and implementation on the remote lighting control and the monitor on the doors and windows are given out.
介绍了一种基于电力载波芯片———PL3105的智能家居控制系统的控制模块、通信模块。
2)  PL3105 chip
PL3105芯片
1.
The significant character of the control system is that the PL3105 chip system as the main control unit for every layer with the control signal for transmis.
系统总体分控制器、集中器和终端控制器三层结构,均以PL3105芯片系统为主控制单元,并以低压电力线为"总线"传输相应的控制命令。
3)  PL
PL
1.
The effects of Danbiqing granule on blood PL,WBC,AKP and morphologic changes in acute cholangitis rabbits;
胆必清颗粒对急性胆管炎家兔血PL、WBC、AKP及形态学改变的影响
2.
In this paper, TiO 2 nanoparticles pure and doped with varying content of Ce were prepared by a sol-gel process using Ti(OC 4H 9) 4 as raw material and characterized by XRD, TEM, BET, XPS and PL spectra.
采用sol gel法制备了纯的和掺杂不同量Ce的TiO2 纳米粒子 ,并利用XRD ,TEM ,BET ,XPS和PL光谱对样品进行表征 ,主要考察焙烧温度和含量对掺杂Ce的TiO2 纳米粒子性质以及光催化降解苯酚活性的影响 ,并探讨了Ce的掺杂对TiO2相变的作用机制以及PL光谱与光催化活性的关系 。
3.
The photoluminescence studies of the irradiated sample showed the intensity of PL was reduced and a blueshift were observed after irradiation.
8 MeV的电子对非故意掺杂的GaN材料进行了辐照,光致发光谱(PL谱)表明,辐照使PL谱的强度随电子注量依次降低,且主发光峰蓝移,在注量较高时,在3。
4)  PL)
PL)
5)  PL spectrum
PL谱
1.
Material structure was grown on(001)semi-induction InP substrate by molecular beam epitaxy(MBE) and measured by PL Spectrum.
衬底片选用(001)半绝缘InP单晶片,结构材料使用分子束外延(MBE)技术制备,并用PL谱对外延片进行测试,器件采用台面结构。
2.
It is found that the flow rate of O_2 influences the crystalline quality, surface morphology and PL spectrum of the as -grown ZnO thin films remarkably.
PL谱分析表明:随O_2气流量加大,带边峰明显增强,深能级峰明显减弱,ZnO薄膜光学质量提高。
6)  PL-TCM
PL-TCM
1.
This paper introduces firstly the technological process of Pickling Line and Tandem Cold Mill(PL-TCM) in Lysteel.
介绍了涟钢酸洗冷连轧联合机组(PL-TCM)采用四机架UCM轧机开发极薄规格产品(≤0。
参考词条
补充资料:“霹雳”1空空导弹(pl-1)
“霹雳”1空空导弹(pl-1)
“霹雳”1空空导弹(pl-1)

简介:

1958年10月,我国开始仿制苏联k-5空空导弹,1960年3月,仿制出第一枚导弹,1964年定型投产。该导弹由无线电控制,自动驾驶仪操纵,横滚稳定自动控制和冷气,战斗部和无线电引信,火箭发动机和电池等5个部分。能全天候使用,主要用于攻击中型轰炸机.

最大飞行速度:2.5马赫

使用高度:2.5-16.5千米

最大发射距离:6千米

说明:补充资料仅用于学习参考,请勿用于其它任何用途。