1) setting material
承烧材料
1.
The interaction between the mullite setting material and bottom cores and its influences on the magnetic properties of MnZn ferrites were investigated in this paper.
研究了莫来石承烧材料与底层磁芯之间的相互作用及其对MnZn铁氧体磁芯性能的影响。
2.
In this dissertation, after preparing high permeability Mn-Zn ferrite materials by oxide electronic ceramic technics, the interaction between bottom magnetic cores and setting materials under industrial manufacturing condition was analyzed, and the temperatrue stability of initial permeability was also discussed.
本文对采用氧化物电子陶瓷工艺制备的高磁导率MnZn铁氧体磁芯在工业生产条件下与承烧材料之间的相互作用关系进行了研究分析，并初步探讨了磁导率的温度稳定性问题。
2) sintered bearing material
烧结轴承材料
3) ablation material
烧蚀材料
1.
In this paper,the applications of nanomaterials in resin matrix ablation material are reviewed.
综述了纳米材料在树脂基烧蚀材料中的应用。
2.
The ablation material for solid rocket motor based EPDM rubber were prepared from EPDM、ZnO、TMTD、S、SiO2、bakelite.
在固体火箭发动机用烧蚀材料研究中,以三元乙丙橡胶(EPDM)为基体材料,以ZnO、TMTD、硫磺、白碳黑、酚醛等为配合剂,制备了EPDM橡胶基的烧蚀材料,采用酚醛作为增强剂,与EPDM进行共混,研究了酚醛的含量对材料性能的影响,测试了材料的物理机械性能和烧蚀性能。
3.
s:RTV rubber was used as basic material in the preparation of ablation material for solid rocket motor.
以室温硫化硅橡胶为基材 ,采用联二脲、芳纶纤维作为配合剂制成了固体火箭发动机用耐烧蚀材料。
4) ablative material
烧蚀材料
1.
The cyanate ester of novolac,prepared in this paper,has lower content of impurity,higher char yield and good processability,which is suitable for use as the matrix of high performance ablative material.
研究结果表明,所制备的酚醛型氰酸酯具有低的杂质含量、高的烧蚀残碳率,适合于高性能烧蚀材料的树脂基体。
2.
The microstructures of two ablative materials were studied.
研究表明:烧蚀材料1＃中的高硅氧玻璃纤维在模拟烧蚀后仍保持其纤维形态不变,并且大、中、小纤维以适当的配比结合,使得纤维堆积密度增大,从而能提高材料的机械强度;烧蚀材料2＃具有蜂窝夹心结构,在蜂窝中填充的低密度材料是由50～100μm的空心玻璃球所组成的,这赋予它密度低、隔热性能好的特点。
5) the calcined material
锻烧材料
补充资料：承承
1.谓代代承继。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条