1) jet grouting
高压喷射注浆法
1.
The application of jet grouting in the ground treatment of high buildings;
高压喷射注浆法在高层建筑地基处理中的应用
2.
There are random fill and locally existing soft interlayer in the mainly supporting layers of subgrade,so the different ground treatment methods of sand cushion substituting the random fill,adjusting foundation dimensions and jet grouting reinforcing the soft interlayer were adopted to satisfy the requirements of subgrade bearing capacity and deformation.
对于地基主要受力层范围内既有杂填土,又局部存在软弱下卧夹层的复杂地质条件,设计上分别采用换填垫层法、调整基础底面积和高压喷射注浆法等不同的地基处理方法来满足上部结构对地基承载力和变形的要求。
2) high pressure jet grouting
高压喷射注浆法
1.
The application of high pressure jet grouting in soft soil foundation;
浅谈高压喷射注浆法在软土地基中的应用
2.
As an advanced construction method the high pressure jet grouting can be widely applied in cut off design for reservoir and bank.
高压喷射注浆法是一种适用于水库大坝防渗较为先进的施工方法 ,就其工艺特点、原理及流程等作了阐述 ,指出合理的施工参数是降低工程造价 ,提高工程质量的关
3.
In this paper, the mechanism of high pressure jet grouting has been introduced.
介绍了高压喷射注浆法的作用机理 ,探讨了在施工过程中高压喷射注浆法引起的超孔隙水压。
3) high-pressure jet grouting method
高压喷射注浆法
1.
In this paper,the handling of impermeability protection of the durability of the piles by installing lateral waterproof curtain formed by high-pressure jet grouting method .
介绍采用高压喷射注浆法设置侧向帷幕的方法,对钻孔灌注桩进行耐久性抗渗防护处理。
2.
Owing to the advantage of high-pressure jet grouting method, its application scope will be wider and wider in highway engineering construction.
路基及结构物如出现异常下沉或桩基础的承载力不足等现象,需要对其进行加固补强,其中一个有效的办法就是使用高压喷射注浆法。
3.
After analyzing the causes,it is treated in the way of high-pressure jet grouting method,after all,the foundation achieves the design criteria and passes the control check.
广州市某花园工程,基础采用钻孔灌注桩,桩基检测后发现部分桩存在质量问题,经分析原因后,采用高压喷射注浆法进行处理后,达到了设计要求,顺利通过验收。
4) the art of anti-seepage wall by jet cement with high pressure
高压喷射注浆造墙法
1.
Based on the flood control project of Jingdezhen city, comparison was made among various anti-seepage methods and the geological conditions were illuminated about the art of anti-seepage wall by jet cement with high pressure.
以景德镇城市防洪工程为例,对各种防渗方案进行了比较,阐述了高压喷射注浆造墙法适用的地质条件,以及控制工程施工质量的措施。
5) jet grouting
高压喷射注浆
1.
The application of jet grouting in the treatment of ooze and quicksand;
高压喷射注浆技术在治理海泥和流砂中的应用
2.
Two foundation treatment methods of DDC and the high pressure jet grouting are introduced through practical project.
通过工程实例,介绍了人工成孔夯扩桩(DDC)和高压喷射注浆两种地基处理方法在工程中的应用,可以处理较为复杂的地基,提高地基承载力,减小复合地基的变形或消除地基土湿陷性等问题。
6) high pressure jet grouting
高压喷射注浆
1.
Application of high pressure jet grouting technique in limestone area;
高压喷射注浆技术在灰岩地区的应用
2.
Technical parameters for high pressure jet grouting by triple tube are classified into 2 categories:parameters for designing and parameters for construction.
三重管高压喷射注浆技术参数分为设计工程参数和施工技术参数两类，文中探讨了各项设计工程参数的实质及各项施工技术参数的关系，分析了各项技术参数对高压喷射工程质量、成本的影响，提出了选择各项技术参数的方
3.
Based on geological conditions of Yellow?River?crossing works in the Diversion Project from South to North China, the properties of grouting material and solidified mass in high pressure jet grouting were researched.
根据南水北调穿黄工程地质条件进行的高压喷射注浆材料及固结体性能研究结果表明,采用水泥系注浆材料所形成的固结体抗压强度、弹性模量、抗渗性能除与水灰比有关外,还与土质有很大关系。
补充资料：陶瓷注浆成型法
陶瓷注浆成型法 陶瓷成型技法之一。在配料中加入较多水分（25—32%），调成泥浆，注入有吸水性的石膏模子内，吸去一部分水分，脱模即得生坯。用于形状复杂或大件制品的成型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条