1) specific enthalpy of exhaust steam
排汽比焓
1.
Based on ASME PTC6 Turbine Performance Acceptance Test Code,the principle of calculating the specific enthalpy of exhaust steam from low-pressure(LP) cylinder has been determined.
根据ASME PTC6汽轮机性能验收试验规范确定低压缸排汽比焓的计算原则,介绍了目前国内外对计算低压缸排汽比焓及热力过程线的4种处理方法,并对各种方法的优缺点进行了具体的分析。
2.
Owing to certain limitation of existing model for calculating the specific enthalpy of exhaust steam from final stage of steam turbine,a modified radial basis network model has been established,which can be used for calculating the specific enthalpy value of exhaust steam from steam turbines.
现有的汽轮机末级排汽比焓计算模型存在一定的局限性,对此提出了一种改进的径向基(RBF)网络模型来计算汽轮机的排汽比焓值。
2) exhaust enthalpy
排汽焓
1.
Novel on-line calculation models for steam turbine exhaust enthalpy and its application;
汽轮机低压缸排汽焓在线计算新模型的研究及应用
2.
A new online model for calculating the exhaust enthalpy was proposed aiming at the limitation of existing online calculation model for calculating the enthalpy of steam turbine LP exhaust hood.
针对现有的汽轮机低压缸排汽焓在线计算模型存在一定的局限性,提出了一种排汽焓在线计算新模型。
3.
When calculating the efficiency of low pressure cylinder,it used the power-balance equation and curve fitting to compute the exhaust enthalpy.
采用功率平衡方程式反推与曲线拟合相结合的方法计算汽轮机的末级排汽焓,解决了排汽湿度难以测量的问题。
3) exhaust steam enthalpy
排汽焓
1.
According to the new varying operation conditions theory, it introduces a new type and exact method to calculate the exhaust steam enthalpy.
根据此变工况理论，给出了计算排汽焓的新型准确的方法。
4) calculation of exhaust enthalpy
排汽焓计算
5) specific steam enthalpy
比蒸汽焓，蒸汽比焓
6) exhaust pressure ratio
排汽压比
补充资料：阻汽排水阀
分子式：
CAS号：
性质：又称疏水器，阻汽排水阀，冷凝水排除器。自动排放冷凝水并阻止蒸汽泄漏的阀门。型式较多，根据操作原理可分为两种：（1）自动排水式。借蒸汽本身的压力将冷凝水排出，例如浮球式疏水阀、浮杯式疏水阀、孔板式疏水阀等。（2）压出式疏水阀。借外加蒸汽压力将冷凝水排出。根据操作方法分为两种：（1）连续式疏水阀，例如浮球式疏水阀、孔板式疏水阀、压出式疏水阀。（2）间歇式疏水阀，例如浮杯式疏水阀。
CAS号：
性质：又称疏水器，阻汽排水阀，冷凝水排除器。自动排放冷凝水并阻止蒸汽泄漏的阀门。型式较多，根据操作原理可分为两种：（1）自动排水式。借蒸汽本身的压力将冷凝水排出，例如浮球式疏水阀、浮杯式疏水阀、孔板式疏水阀等。（2）压出式疏水阀。借外加蒸汽压力将冷凝水排出。根据操作方法分为两种：（1）连续式疏水阀，例如浮球式疏水阀、孔板式疏水阀、压出式疏水阀。（2）间歇式疏水阀，例如浮杯式疏水阀。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条