说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压应力水平
1)  compressive stress level
压应力水平
1.
There may exist large difference and asymmetrical distribution of the compressive stress level in the vertical members in some tall and super tall R.
在长期重力载荷作用下,高层及超高层钢筋混凝土建筑结构竖向构件压应力水平差异较大,而不均衡分布时,混凝土的徐变效应可能导致建筑产生较大的侧移倾斜变形,影响建筑的长期使用,甚至导致结构安全隐患。
2.
There may exist large difference and asymmetrical distribution of the compressive stress level in the vertical members in some complex tall RC buildings.
在长期重力荷载作用下,当高层钢筋混凝土建筑结构竖向构件压应力水平差异较大而呈不均衡分布时,混凝土的徐变效应可能导致建筑整体产生较大的侧移倾斜变形,影响建筑的长期安全使用。
2)  principal horizontal compressive stress
水平主压应力
3)  horizontal compressional stress
水平压缩应力
4)  horizontal stress
水平应力
1.
Physical simulation test of damage character of surrounding rock under different levels of the horizontal stress
不同水平应力作用下巷道围岩破坏特征的物理模拟试验
2.
Effect of horizontal stress and rock crack density on roof safety thickness of underground area
水平应力与裂隙密度对顶板安全厚度的影响
3.
In order to determine the effects of horizontal stress on floor heave of soft rock roadway in deep mines,the effects of different rock strength,lateral pressure coefficients and depths of notching in floor on deformation of roadway are numerically studied by means of FLAC3D software.
为了确定水平应力对深井软岩巷道底鼓的影响,采用数值模拟软件FLAC3D对不同岩性、不同侧压系数的巷道变形破坏情况及底板切槽深度对巷道变形的影响进行了研究。
5)  stress level
应力水平
1.
Analysis of the effects of temperature distribution on stress level in a rotating disk;
旋转盘应力水平与温度分布的关联分析
2.
Calculation and experiment on consolidation coefficient for soft clay considering different stress levels;
考虑应力水平的软土固结系数计算与试验研究
3.
Relationship between entrance pore distribution and stress level of natural sedimentary diatomaceous soil;
天然硅藻土的应力水平与孔隙空间分布的关系
6)  pressure level
压力水平
1.
udy on rational pressure level of 63+4 formation in upper Guantao Formation of the west seventh region in Gudong oilfield.;
孤东七区西馆陶组上亚段6~(3+4)层系合理压力水平研究
2.
This article researches the injection-production system in one segment of Huabei Oilfield,analyzes the injection-production system of whole segment and decides the reasonable injection-production system,from well pattern adaptation,ratio of injection-production and well numbers,pressure adaptation,reasonable pressure level.
研究华北某断块油藏注采系统,从井网适应性评价、合理注采比、注采井数比评价、注水系统压力适应性评价、合理压力水平评价四个方面入手,分析整个断块注采系统的情况,确定了合理的注采系统。
补充资料:轧辊残余应力(见轧辊应力)


轧辊残余应力(见轧辊应力)
residual stresses in roll

zhagun eanyu yingli轧辊残余应力(residual stresses in roll)见礼辐应力。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条