1) power flow model
功率流模型
1.
According to the analysis of the power flow model of this transmission,the efficiency of this transmission is higher than that of the cascade system in vehicle.
经对该变速系统的功率流模型的分析可知,基于无级变速系统的功率流数学模型的效率比常规级联式车用电传动系统高。
2) Power
功率
1.
Power Calculation of Twin Rotor Mixer;
双转子连续混炼机功率计算
2.
Ways of Power Signal’s Simultaneous Processing;
机床切削功率信号实时处理方法
3) power consumption
功率
1.
In the research, mass transfer coefficients (KLa) of various type of agitators in a vertical cylindrical vessel were measured by pure oxygen absorption method, aad the power consumption were also determined.
本文采用纯氧物理吸收法在立式圆筒形釜中测定了气液容积传质系数K_La,也测量了功率。
2.
The power consumption characteristics of the absorber of CO_2 by watering a rotating packed bed with wire packing in air independent propulsion(AIP) were throretically analyzed and the power model of this absorber was built on the experiments.
对不依赖空气动力装置(AIP)系统的水吸收CO2不锈钢丝网填料旋转床吸收器功耗特性进行了理论分析和实验研究,建立了该型吸收器功率消耗模型。
3.
The real power consumption of saline field filming machine (SFM) is composed of rotating power (including power of cutting soil and throw rising soil) and hauling power,which are very difficult to determine because the function of SFM is different from that of a rotary cultivator.
在防渗铺膜机实际功耗很难确定的条件下，以因次分析为基础，用小型样机测出主要参数，由瑞烈法确定受力的数学模型，求出在实际工作状态下的功耗，为选取牵引拖拉机的功率提供了可靠的依据。
4) aggregate capacity
"总功率,机组功率"
5) high-power
大功率
1.
Manufacture and application of high-power fast gleithobel plough;
大功率快速滑行刨煤机的研制与应用
2.
Primary analyses of the development of marine high-power diesel engine industry;
船用大功率柴油机产业发展初步分析
3.
Optimum Design of Passive Coupler with Two-way Splitter for High-power Laser;
大功率激光两分束无源耦合器的优化设计
6) Power factor
功率因数
1.
Principle and approach to improve power factor of induction furnace of intermediate frequency;
一种提升中频加热炉功率因数的原理及方法
2.
Design and experiment of high power factor converter on arc welding inverter power source;
高功率因数弧焊逆变电源的整流器设计与实验
3.
The Method of Group-Control for Electronic Ballasting of the High Power Factor;
高功率因数电子镇流的群控方法
参考词条
补充资料：反流模型
分子式：
CAS号：
性质：研究分离和反应设备，考虑由于分子扩散、涡流扩散以及流体遇到固体颗粒产生的偏流。对轴向和径向质量传递的影响而建立的模型。分子扩散、涡流扩散以及流体遇到固体颗粒产生的偏流总称为弥散。在轴向和径向的弥散作用分别用轴向弥散系统和径向弥散系数表示。对固定床反应器建立的弥散模型也称为混合扩散模型；对萃取分离塔建立的弥散模型也称为反流模型。
CAS号：
性质：研究分离和反应设备，考虑由于分子扩散、涡流扩散以及流体遇到固体颗粒产生的偏流。对轴向和径向质量传递的影响而建立的模型。分子扩散、涡流扩散以及流体遇到固体颗粒产生的偏流总称为弥散。在轴向和径向的弥散作用分别用轴向弥散系统和径向弥散系数表示。对固定床反应器建立的弥散模型也称为混合扩散模型；对萃取分离塔建立的弥散模型也称为反流模型。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。