1) Explosive consolidation method
爆炸固结法
2) explosive consolidation
爆炸固结
1.
Research on Nb-based composite by explosive consolidation;
Nb基复合材料的制备——爆炸固结法
2.
Mo/Cu functionally gradient material (FGM) was prepared by self-propagating combustion preheating and bidirectional explosive consolidation with buffer action of water.
设计并采用自蔓延燃烧预热,水介质缓冲双向爆炸固结的方式制备了Mo/Cu功能梯度材料(FGM),观测了Mo/CuFGM的显微组织并分析了固结过程。
3.
Aiming at some new rapid consolidation technologies in powder metallurgy industry developed very quickly during the last ten years, the features, the forming principle and the applicable prospect of explosive consolidation, microwave sintering, spark plasma sintering, selective laser sintering, etc, are introduced.
针对粉末冶金行业近10年来出现的快速固结新技术,简要地介绍其中的微波烧结、放电等离子烧结、选择性激光烧结、爆炸固结、场激活燃烧合成的原理、特点、应用和发展状况。
3) explosion reinforcement method
爆炸加固法
4) explosive consolidation
爆炸烧结
1.
Shock-state equation of porous materials generalized along equal-pressure lines in explosive consolidation;
爆炸烧结中多孔材料等压推广冲击状态方程
2.
in explosive consolidation of metal powders were studied recur to experiment results.
结合实验结果在细观结构上对金属粉末爆炸烧结过程中颗粒间的微爆炸焊接、微摩擦焊接、微孔隙塌缩等机制进行了分析,用爆炸焊接理论分析了产生上述沉能机制的条件;通过建立无夹角斜碰撞模型分析了颗粒尺度、材料强度、冲击速度、材料的摩擦系数和蓄热能力等因素对摩擦焊接结合质量的影响;借助于多层片组冲击动力学模型提出了使粉末整体升温的微冲击波耗散沉能机制。
3.
The numerical simulation of powder explosive consolidation has been performed in this paper.
用二维流体弹塑性体模型和Ｅｕｌｅｒ算法完成了粉末爆炸烧结的数值模拟；给出了爆炸烧结过程中密度分布和压力分布；研究了炸药和粉末参数对爆炸烧结的影响；讨论了几种实验装置设计方案的效果。
5) explosive sintering
爆炸烧结
1.
Characteristics of CuCr contact materials made by explosive sintering;
爆炸烧结CuCr触头材料的性能
2.
The technique of powder preheating and explosive sintering was used to prepare single phase nano-ceramic, with the raw material of α-Al2O3 powder with grain size about 40nm.
采用预热粉体爆炸烧结技术制备单相纳米陶瓷，用４０ｎｍ的α－Ａｌ２Ｏ３粉体作原料进行烧结试验，用高倍扫描电镜、Ｘ射线衍射分析等手段对试验结果进行了测试。
3.
In this paper, the merits of explosive sintering and its development are introduced first, then the method of explosive sintering and the mechanism of sintering are displayed, the relation of initialized specific volume to Hugoniot line of W-Ti is analyzed according to the discuss of Hugoniot line of pulverous materials.
本文首先对爆炸烧结的优点和国内外发展概况做了说明，接着对爆炸烧结方法和烧结机制作了简介，然后通过对粉末材料冲击绝热线的讨论，分析了W-Ti粉末冲击绝热线与其初始比容间的关系。
6) explosion structure
爆炸结构
1.
The method of APDL,Matlab and VC++ mixed-codes programming is adopted in the design of the optimization software to explosion structure.
针对爆炸结构的设计及优化,采用APDL、Matlab和VC++语言混合编程的方法优化软件的设计,不但可以方便地实现优化算法和设计友好的用户界面,还能实现数值模拟计算程序与优化程序联合使用,可以有效地缩短程序设计时间。
补充资料：核爆炸地震波探测(见核爆炸探测)
核爆炸地震波探测(见核爆炸探测)
nuclear explosion seismic detection
hebaozho dizhenbo tanee核爆炸地震波探测(nuclear explos，onseismie detecuon)见核爆炸探汉，l。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条