说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 混合行波
1)  mixed travelling wave
混合行波
1.
This system, taken mixed travelling wave of current and voltage as electrical quantity and wavelet transformation technology as analysis tool, realized the precision of range finding to be smaller than the fault range finding of 500 m, and remedied the deficit of range finding adopted current travelling wave for terminal line.
该系统以电流电压混合行波为电气量,以小波变换技术为分析工具,实现了精度小于500m的故障测距,弥补了对终端线路单纯采用电流行波测距的不足。
2)  hybrid wave/mode control
行波/模态混合控制
3)  Mixed filter
混合滤波
1.
The purpose of this study is to improve the precision of SPOT image,and the method used is a mixed filter combined with noise detection, which is based on the complementary of the average filter and the median filter.
研究方法是噪声检测结合混合滤波的方法,该方法基于均值滤波和中值滤波的互补性,首先对图像每一个像素点进行噪声检测,把受高斯噪声污染和受椒盐噪声污染的像素点区分开,然后分别对受高斯噪声污染和受椒盐噪声污染的像素点进行处理。
2.
To solve the question,a mixed filter background suppressed algorithm based on edge detection(MFBED) is proposed.
针对此特点,提出了基于边缘检测的混合滤波背景抑制算法。
4)  hybrid filter
混合滤波
1.
To reduce these disadvantageous influences,a hybrid filter that combines polynomial prediction filter and median filter for denoising was employed.
为此,在混合滤波去噪的基础上,采用了一种用微粒群算法优化的最小绝对误差辨识算法。
5)  hybrid wavelet
混合小波
1.
Based on the framework,a new hybrid wavelet denosing approach was proposed.
根据第二代小波变换的特点,提出一种自适应小波变换的框架,在此基础上提出一种混合小波降噪方法。
6)  hybrid waveforms
混合波形
1.
The design method for hybrid waveforms utilizing ran-dom poly-cell code pulse position modulation (PPM) and pulse-to-pulse binary sequences phase modulation (PM) is introduced in thispaper.
该文提出了一种利用随机多元码脉位调制(PPM)和脉间伪随机或随机二元序列相位调制(PM)相结合的混合波形设计方法。
补充资料:导行电磁波
      全部或绝大部分电磁能量被约束在有限横截面内沿确定方向传输的电磁波。常用导体和介质的边界作约束手段,如金属波导管、介质线、金属线等。封闭波导管使电磁波局限在管内传输。凡截止波长大于工作波长的模式都可以是导行波;开波导的导行波又称表面波,其场随着与边界的距离的增加而衰减;介质中挖空的导管(见图)也能传输表面波。常见的导行电磁波的结构有传输线、微带线(见微带线和类微带线)、波导、波束波导和光波导等结构。导行波除了在上述结构中沿轴向传输外,还可沿径向或周向传输,如径向波导,由地球表面和电离层构成的环球波导等。导行电磁波的场分布可用模式表示(见电磁波模式),常采用单模传输,如同轴线用TEM模、矩形波导用TE10模等。单模易于控制,不存在模式间的能量变换;即使采用多模传输,其主要能量仍集中于一个需要模(但多模光纤传输却例外,因所有传输模都参与信息的传递)。导行波的传输特性取决于导行结构及其所传输的模式,后者以衰减小、易控制、便于检测为选择原则。
  
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条