1) characteristics of the body
阀壳结构特点
2) Structure Characteristic
结构特点
1.
The structure characteristic and management of DZ type outside-pourable monomer hydraulic supports;
DZ型外注式单体液压支柱的结构特点及管理措施
2.
The assembly techniques and structure characteristic of the generator stator in Dachaoshan hydro-power station;
大朝山水电站发电机定子结构特点及装配工艺
3.
The structure characteristics and energy-saving effect of amorphous alloy transformer;
非晶合金铁芯配电变压器的结构特点和节电效果
3) structure characteristics
结构特点
1.
Installation method and structure characteristics of turbine-generator units for Pengshui hydropower station
彭水水电站水轮发电机组结构特点和安装方法介绍
2.
The paper introduces the technical parameters,working principle,main structure characteristics of the rotary drum type differential speed cutting flying shear imported from Japan;and describes the shearing process and shearing quality.
介绍了从日本引进的异周速双滚筒切头飞剪的技术参数、工作原理、主要结构特点,对剪切过程及剪切质量进行了描述;应用力学原理,分析了剪切过程中滚筒组的扭转变形规律,相应的刀刃侧隙沿滚筒轴线变化特点,M-T齿轮对的功用,分配齿轮和M-T齿轮所具有的正变位、短齿、齿向修形结构特点。
3.
The preparation and structure characteristics of organosolv lignin were introduced in this article while its applications on polymer synthesis and modification were presented in detail.
溶剂型木质素(Organosolv lignin)与传统木质素盐类相比具有反应活性基团含量高、容易提纯以及不含任何含硫杂质等优势,论文着重介绍了溶剂型木质素的制备、结构特点以及近几年来在高分子合成和改性领域的研究进展,并对其发展方向作了总结。
4) structural characteristics
结构特点
1.
The development of 70 m~3 polymerizer and its structural characteristics;
70m~3 PVC聚合釜的研发与结构特点
2.
The structural characteristicsand the changing laws of knitted garment;
针织服装上衣结构特点及其变化规律研究
3.
Design capabilites and structural characteristics of generating units of the Three Gorges power station;
三峡机组设计性能及结构特点
5) structure feature
结构特点
1.
Comment of 4-wing rotor design and its structure feature;
四棱转子棱体设计及其结构特点评述
2.
Briefly described are the main performance parameters, structure features, calculation and test, etc.
简要介绍了GQ70(GQ70H)型轻油罐车的主要性能参数、结构特点、计算、试验等情况。
3.
The main structure feature of the reactor, its process and main technical economy indexes, are described; Some comparisons of the reactor are made with the widely used R-P reactor, or Dorr reactor in productivity and power consumption unit volume; for Badger's reactor, its power consumption is 0.
介绍Badger等温反应器的结构特点、工艺过程、主要技经指标,并与国内使用RP、Dorr槽进行生产强度和单位容积能耗的对比,说明Badger等温反应器能耗低(0。
6) structural feature
结构特点
1.
Structural feature of metro station with cover and cut method;
盖挖逆作地铁车站的结构特点
2.
The article describes the structural features and configuration of the edger stand with whole hydraulic screw-down for HCM Rough mills.
简要介绍全液压压下立辊轧机的结构特点及组成。
3.
This paper detailed the technical characters and structural features of some new foreign shearer loaders and continuous miner.
本文较深入地分析了目前国外几种新型电牵引采煤机和连续采煤机的技术性能和结构特点。
补充资料：溢流阀、顺序阀、减压阀的比较
溢流阀 | 减压阀 | 顺序阀 | ||
控制油路的特点 | 通过调整弹簧的压力控制进油路的压力，保证进口压力恒定，p2＝0 | 通过调整弹簧的压力控制出油口的压力，保证出口压力p2稳定 | 直控式－通过调定调压弹簧的压力控制进油路压力；夜控式－由单独油路控制压力 | |
出油口情况 | 出油口与油箱相连 | 出油口与减压回路相连 | 出油口与工作回路相连 | |
泄漏形式 | 内泄式 | 外泄式 | 内泄式 | |
进油口状态及压力值 | 常态 | 常闭（原始状态） | 常开（原始状态） | 常闭（原始状态） |
工作状态 | 进出油口相通，进油口压力为调整压力 | 进油口压力低于出油口压力，出油口压力稳定在调定值上 | 进出油口相通，进油口压力允许继续升高 | |
联接方式 | 并联 | 串联 | 实现顺序动作式串联作卸荷阀用时并联 | |
功用 | 定压、溢流或安全作用限压、稳压、保压 | 减压、稳压 | 不控制系统的压力，只利用系统的压力变化控制油路的通断 | |
进油腔压力p1控制阀芯移动 | 出油腔压力p2控制阀芯移动 | 进油腔压力p1控制阀芯移动 | ||
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条