1) solid film lubricant
固体膜润滑剂
1.
Two kinds of solid film lubricant,HR-7201 and HR-7101,were prepared to fit new aircraft.
针对新机种对固体膜润滑剂的需求,研制了两种固体膜润滑剂-HR-7201和HR-7101。
2) solid lubricating film
固体润滑膜
1.
Technique and application of PTFE solid lubricating film;
PTFE固体润滑膜技术及其应用
2.
It is introduced the tribological characteristics of polyimide solid lubricating film, analyzed the affecting factors on tribological characteristics of polyimide solid lubricating film, and proposed research suggestions of polyimide solid lubricating film.
综述了聚酰亚胺固体润滑膜的摩擦特性,分析了影响聚酰亚胺固体润滑膜摩擦特性的因素,对聚酰亚胺固体润滑膜研究提出了建议。
3.
The main reason of failure is that the solid lubricating film formed by the polytetrafluoroethylene(PTFE)composite(the lining material of the friction plates)is easily spoilaged due to the poor heat resistance of PTFE.
失效的主要原因是作为衬层的改性聚四氟乙烯(PTFE)复合材料的耐热性差,导致固体润滑膜易损耗。
3) solid film lubricanting
固体膜润滑
4) solid lubricant
固体润滑剂
1.
Mechanical properties and microstructure of Al_2O_3/TiC ceramics with the addition of solid lubricants;
添加固体润滑剂的Al_2O_3/TiC陶瓷材料力学性能和显微结构
2.
A solid lubricant OCL-RH for drilling fluid.;
钻井液用固体润滑剂OCL-RH的研制
3.
A kind of new anti-friction abrasion resistant coating is prepared with methyl methacrylate homopolymer as binder, MoS2 as solid lubricant, butadiene acrylonitrile rubber (BNR)/ acrylonitrile-butadiene-styrene (ABS) resin as flexibilizer, and other additives.
采用甲基丙烯酸甲酯均聚物为成膜物,以二硫化钼(MoS2)、丁腈橡胶/ABS树脂为固体润滑剂和增韧弹性体,加入其他助剂,获得一种新型的减阻耐磨涂料,并对其磨损机理进行了初步的探讨。
5) solid lubricants
固体润滑剂
1.
Self lubricating conducting composites with controllable phase transformation were prepared, which were added solid lubricants such as PTFE, graphite and Ekonal to the conductive matrix of LDPE/CB(carbon black).
研制了相变可控的复合导电和自润滑材料 ,它是以低密度聚乙烯 -炭黑为导电基材 ,加入固体润滑剂聚四氟乙烯、石墨和 Ekonal(聚苯酯的商品名 )构成。
2.
A novel high temperature composite based on Poly (phthalazinone ether sulfone ketone) (PPESK) adding solid lubricants and shot pitch-based carbon fibers are prepared in this paper.
以含二氮杂萘酮结构的聚醚砜酮（ＰＰＥＳＫ）树脂为基体，填加固体润滑剂和短炭纤维（ＣＦ）制备了新型耐热树脂基复合材料、研究了摩擦条件（如载荷、行程等）和ＣＦ含量对复合材料的摩擦磨损性能的影响，分析了ＰＰＥＳＫ树脂及其复合材料的磨损机理。
3.
The self lubricating mechanism of the composites was analyzed with emphasis on the effect of the solid lubricants.
采用粉末冶金自由烧结工艺制备出锡青铜基自润滑复合材料 ,对该类复合材料的力学性能与摩擦磨损特性进行了研究 ,从固体润滑剂角度就其室温与 45 0℃自润滑机理进行了分析与探讨 。
补充资料：采用高分子固体润滑剂加工冷拉的金属制品
采用高分子固体润滑剂加工冷拉的金属制品
采用高分子固体滤肯利加工j引j的垒甚制品 R瑚舛{段j。学高分于研：￡所供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条