1)  Throttle orifice
节流阀口
2)  throttle
节流
1.
Numerical Simulation on Cavitation of Throttle in Tube;
管道节流过程中气蚀的数值模拟
2.
1 natural gas process plant in Kela 2 field used the throttle method to eliminate the water and heavy hydrocarbons in the natural gas.
克拉2气田第一气体处理厂采用节流法脱水脱烃,注入乙二醇防止水合物的形成,控制天然气的水露点和烃露点,达到管输天然气的技术要求。
3.
Downhole throttling technology is to adjust downhole pressure through installing the throttle valve in an appropriate position on the tube.
气井井下节流工艺将节流器安装于油管的适当位置来实现井下调压,能充分利用地热对节流后的天然气加热,从而改变天然气水合物的生成条件,对于防止水合物生成起到了积极的作用。
3)  throttling
节流
1.
To completely solve the problem, two set of heat exchange, throttling, low temperature separation (LTS) units are built on the general Yulin gas plant.
为彻底解决该问题,先后在榆总站建设了两套大面积换热、节流、低温分离工艺装置,并在现场进行了工业性试验。
2.
To solve this problem,this paper introduced a kind of double-throttling choke,and also built up its designing model.
安装一个节流油嘴存在的最大弊端是节流前后压差很大,造成节流油嘴密封部件很容易失效,这就是目前井下节流仅在浅井中得到广泛应用,而在中深井中应用受到限制的原因之一。
3.
Direct throttling expansion refrigeration is an ordinary low temperature separation method, which can be used to recover light hydrocarbon.
直接节流膨胀制冷工艺是轻烃回收用低温分离方法中最常见的一种,要求天然气必须有较大的可利用压能和压差。
4)  choke
节流
1.
This paper analyzed the effect of downhole choke on pressure and temperature, finding that the downhole choke can prevent hydrate forming, improve liquid carrying capacity of the gas and relieve bottomhole pressure surges under low production rates.
为此,分析了井下节流器对压力、温度的影响,发现井下节流器能够在低产气量下起到防止水合物产生、提高提高气体携液能力、减缓井底压力激动等作用。
2.
Flow state parameters, in particular, critical pressure ratio, are essential in design and calculation of gas well downhole chokes, determining flow state in the choke and in guarantee of steady production of a gas well.
临界状态参数,尤其是临界压力比,这是天然气井下节流嘴设计计算以及判断节流嘴内是否达到临界流动,能否实现气井稳产的关键数据。
3.
Based on the discussion of nozzle and pipelines choke characteristic, the differences are compared and analyzed.
讨论了气嘴节流和管道内绝热节流流动的特点,对两者进行了比较和分析,并计算得到了天然气绝热节流工程中温度随压力的变化曲线,得出在高压下天然气节流同样会产生温升效应。
5)  economize the expenditures
“节流”
1.
In order to do college`s financial management well,build up college`s scientific financial concept,the author Will give some advice on how to handle the coffers,how to raise money through various channels and how to broaden the sources of income and economize the expenditures.
文章对做好学校财务管理工作,树立科学的财务管理理念,学校资金的运用,以及多渠道筹资和“开源”“节流”等问题进行了分析和探讨。
6)  throttle valve
节流阀
1.
Design of high pressure self-control hydrodynamic throttle valve;
高压自控液动恒压节流阀的设计
2.
Fluid field analysis of high pressure throttle valve and its structure improvement;
高压节流阀流场分析及其结构改进
3.
Improvement in Pole KBH-5 type hydraulic safe winch which using the throttle valve made in China;
波兰KBH-5型液压安全绞车采用国产节流阀的改进
参考词条
补充资料:溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动
说明:补充资料仅用于学习参考,请勿用于其它任何用途。