说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压力影响系数
1)  Pressure affection Factor
压力影响系数
2)  diffusion coefficient
影响力系数
1.
Based on 2002 Input-Output tables for Hebei,the paper first calculates diffusion coefficient and inducing coefficient of all methods;Then analyses the calculation results,discusses the proper meaning.
讨论了影响力系数和感应度系数的主要计算方法。
2.
The paper calculates the diffusion coefficient and the induct coefficient of 38 industries in Sichuan Province with the method of Input-out analysis.
运用投入产出分析方法,计算出四川省38个部门产业影响力系数和感应度系数,对38个部门产业关联情况进行分析,判断某个产业对四川经济发展的带动作用和四川经济发展对其的需求程度,并结合四川省目前产业发展基础,选择确定在整个经济发展中起重要作用的主导产业作为四川省产业发展的重点。
3)  influence coefficient
影响力系数
1.
The result shows the response coefficient and influence coefficient are increasing year after year,and in agricultural structure,the value of FE is more than 1 in livestock husbandry,fishery and others,especially livestock husbandry.
结果表明 ,从农业结构分析 ,农业的感应度系数和影响力系数都在逐年增大 ;畜牧业、渔业和其他农业的FE值均大于 1 ,特别是畜牧业值最大 。
2.
The response coefficient and influence coefficient in input-output method are often used to appraise the tensile and impulse action of each sector and identify the key sectors in industrial economics.
产业经济学常用投入产出方法中的影响力系数和感应度系数来评价部门的拉动和推动作用,从而作为确定国民经济中关键部门最重要的参考指标。
4)  effect coefficient
影响力系数
1.
By calculating the effect coefficient and sensitivity coefficient based on the input-output table of 2002 in China,we analyze the status of China’s 42 industrial departments and identify the key departments.
利用我国投入产出表,计算出反映产业关联的影响力系数和感应度系数,分析了各产业在国民经济发展中的地位,指出了关键产业,为政府决策提供依据。
2.
Based on Zhejiang\'s 2002 and 2005 Input-Output tables with 42 industrial sectors,this article separately calculates each sector\'s effect coefficient and sensitivity coefficient with the method of input-output analysis.
基于浙江省2002年和2005年42部门投入产出表,运用投入产出分析方法分别测算各个部门的影响力系数和感应度系数,并按各个部门这两个系数的大小分别进行了排序,在此基础上对2002年、2005年浙江省产业进行关联比较分析,由此发现浙江省2002、2005年主导产业部门绝大多数属于装备制造业部门,能源、原材料等基础产业部门对经济制约显著,而第三产业发育不足。
5)  side resistance coefficient
侧阻力影响系数
1.
Through the analysis on the elements influencing the bearing capability such as settlement, mud thick and shape of hole wall the mechanics adopting post grouting technology to enhancing bearing capability of single pile are elaborated and the side resistance coefficient and end resistance coefficient are introduced.
说明了后压浆技术在钻孔灌注桩施工中提高单桩承载力的机理 ,并引入侧阻力影响系数及端阻力影响系数 ,提出了后压浆钻孔灌注桩单桩承载力的计算方
6)  end resistance coefficient
端阻力影响系数
1.
Through the analysis on the elements influencing the bearing capability such as settlement, mud thick and shape of hole wall the mechanics adopting post grouting technology to enhancing bearing capability of single pile are elaborated and the side resistance coefficient and end resistance coefficient are introduced.
说明了后压浆技术在钻孔灌注桩施工中提高单桩承载力的机理 ,并引入侧阻力影响系数及端阻力影响系数 ,提出了后压浆钻孔灌注桩单桩承载力的计算方
补充资料:连轧影响系数


连轧影响系数
influence coefficient in continuous rolling

1 ianzha yingxiang xishu连轧影响系数(influenee eoefficiont in con-tinuous rolling)用板速增量方程、板厚增量方程和功率增量方程为基本方程组(共有3n个方程,n为连轧机架数)描述的在稳态条件下连轧机各机架参数关系中列向量与已知量的比值。基本方程组可写成如下矩阵形式: AX~CY 式中A为未知量的系数 矩阵;X为未知量的列 向量;C为已知量的系数 矩阵;Y为已知量的列向 量。若给定一个已知量, 而令其他己知量均为 零,对上述矩阵形式的 基本方程组求解,则得 到在该已知量的作用下 各种参量的变化情况。 例如,给定第j架辊缝变 化量为心,,而令其他已 知量均为零,则可得到 3,个未知量,这些未知 量都是在惟一的已知量 站,的作用下产生的,因 _,._一二(户的/h),。,[ 此若令A。=之共器!二三,则 ~旧丫“,少八S,’尹切 此比值儿,表示第夕机架的辊缝变化量昭,对第i机架板厚变化量(劫/h)、的影响。这一计算方法于1967年由日本美坂佳助提出的,现已成为连轧稳态特性(见连轧综合特性)分析中一种常用的数学模拟方法。 (赵以相)
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条