说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 失效概率算子
1)  invalidation-probability operator
失效概率算子
2)  failure probability
失效概率
1.
Assessment method for failure probability of corroded pipeline;
腐蚀管线失效概率的评定方法
2.
A fast efficient procedure for computing failure probability of uncertain structural systems;
结构体系失效概率计算的一种快速有效方法
3.
Lagrange Method for the Calculation of the Failure Probability of the Pressure Vessels Containing Surface Cracks;
含表面裂纹压力容器失效概率计算的Lagrange方法
3)  probability of failure
失效概率
1.
Taking the toe debris present in a single pile for example,the probability of failure of the pile considering the possibility of toe debris presence is formulated by integrating the probabilities of failure for an intact pile and a pile.
以单桩桩底可能出现的沉渣缺陷为例,采用全概率理论将完整桩的失效概率和桩底含有沉渣的桩的失效概率有机地结合起来,得到了单桩的失效概率。
2.
The method may receive more accurate index of reliability and probability of failure,but its efficiency is not high,must improve to sampling methods.
介绍了结构可靠性的基本原理和基本分析方法,利用ANSYS中的可靠性分析工具——Probabilistic Design,对框架结构的可靠性进行了分析,实例证明:该方法可得到比较精确的可靠度指标和失效概率,但是其效率不高,需要对其抽样方法进行改进。
3.
The annual probability of failure for new slopes is deduced;and an approach is presented to predict the annual probability of failure for existing slopes within next service time.
推导了新建边坡在未来服役时间内的年失效概率的计算公式,并对现役边坡在未来服役时间内的年失效概率进行了预测。
4)  Invalidation probability
失效概率
1.
Based on this, the invalidation probability of the storage battery group can be calculated and its distribution function F(t) is in accorda.
据此可以算出蓄电池组的失效概率,并得到其分布函数F(t)是服从两参数指数分布的。
2.
The author estimates invalidation probability of mechanism facility when the distributing function of strength and stress is known.
可靠度的估计是可靠度分析中重要问题,本文分析当强度、应力的分布函数未知时,估计机械设备失效概率。
5)  probability of failure spots
失效点概率
6)  small failure probability
小失效概率
1.
Subset simulation is a general method for structural dynamic reliability computation,and it is especially efficient for small failure probability computation of nonlinear structure.
子集模拟法在计算结构动力可靠度时适用范围较广,针对非线性结构小失效概率的计算效率较高。
补充资料:凹算子与凸算子


凹算子与凸算子
concave and convex operators

凹算子与凸算子「阴~皿d阴vex.耳阳.勿韶;.留叮.肠疽“‘.小啊j阅雌口叹甲司 半序空间中的非线性算子,类似于一个实变量的凹函数与凸函数. 一个Banach空间中的在某个锥K上是正的非线性算子A,称为凹的(concave)(更确切地,在K上u。凹的),如果 l)对任何的非零元x任K,下面的不等式成立: a(x)u。(Ax续斑x)u。,这里u。是K的某个固定的非零元,以x)与口(x)是正的纯量函数; 2)对每个使得 at(x)u。续x《月1(x)u。,al,月l>0,成立的x‘K,下面的关系成立二 A(tx))(l+,(x,t))tA(x),00. 类似地,一个算子A称为今单(~ex)(更确切地,在K上“。凸的),如果条件l)与2)满足,但不等式(*)用反向不等号代替,并且函数粉(x,t)<0. 一个典型的例子是yP‘KOH积分算子 通rx‘t、1二f天(t.:,x(s))山, G它的凹性与凸性分别由纯量函数介(t,s,。)关于变量u的凹性与凸性所确定.一个算子的凹性意味着它仅仅包含“弱”的非线性—随着锥中的元素的范数增加,算子的值“慢慢地”增加.一般说来,一个算子的凸性意味着,它包含“强”的非线性.由于这个理由,包含凹算子的方程在许多方面不同于包含凸算子的方程;前者的性质类似于相应的纯量方程,而不同于后者,后者关于正解的唯一性定理是不成立的.
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条