说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 去耦材料
1)  decoupling material
去耦材料
1.
The formula of input impedance,homology coefficient and insertion penalty of the decoupling material with multiple layer architecture is provided by using the method of transitive matrix.
本文主要对隔声去耦材料的隔声性能进行研究,用传递矩阵方法推导了多层结构去耦材料的输入阻抗、相应的透射系数和插入损失的公式,对隔声去耦材料的插入损失频谱进行数值分析与仿真计算。
2)  separate-sound and decoupled material
隔声去耦材料
1.
Experiment research of acoustics performance of separate-sound and decoupled material;
隔声去耦材料声学性能试验研究
3)  uncoupled anechoic material
隔声去耦材料
1.
Experiments were made on vibration and sound radiation from finite stiffened double cylindrical shell covered with the uncoupled anechoic material,and the values were measured for structure response of the shell′s surface and sound pressure.
文中对有限长敷设隔声去耦材料的加筋双层圆柱壳进行了振动和声辐射试验,测量了壳体的结构响应和水中的辐射声压,对内外壳全部敷设、内壳全部敷设、外壳全部敷设以及外壳部分敷设隔声去耦材料四种敷设方式进行了对比。
2.
Experiment on vibration and sound radiation from finite stiffened double cylindrical shell covered with the uncoupled anechoic material is done,and the values of structure response of the shell s surface and sound pressure are measured.
对有限长敷设隔声去耦材料的加筋双层圆柱壳进行了振动和声辐射试验,测量了壳体的结构响应和水中的辐射声压,对内外壳全部敷设、内壳全部敷设、外壳全部敷设以及外壳部分敷设隔声去耦材料4种敷设方式进行了对比。
4)  Material removal
材料去除
1.
Research on material removal of magnetorheological finishing;
磁流变抛光材料去除的研究
2.
Study on material removal theoretical model of zone polishing technology
环带抛光技术材料去除理论模型研究
3.
Analyzing the understanding of previous polishing mechanism,our comprehension and hypothesis of material removal mechanism of super smooth surface polishing are enunciated.
胶体SiO2抛光LBO晶体获得无损伤的超光滑表面,结合前人对抛光机理的认识,探讨了超光滑表面抛光的材料去除机理,分析了化学机械抛光中的原子级材料去除机理。
5)  material removal rate
材料去除率
1.
Contrastive experiments on conventional lapping and ultrasonic lapping indicate that the material removal rate of the latter is three times that of the former.
进行了普通与超声研齿对比试验表明,超声研齿材料去除率可达到普通研磨的三倍,齿面微切削与塑性流动纹理明显,点蚀深度、划痕长短均匀,齿面质量明显优于普通研磨齿面,即粗糙度低至0。
2.
Both high material removal rate(MRR) and smooth surface have to be achieved in primary chemical mechanical polishing(CMP) of hard disk substrates.
硬盘盘基片粗抛光必须在较高材料去除率的基础上获得高表面质量。
3.
The relationship between the material removal rate and the machining parameters is discussed by experiments.
以玻璃为被加工工件的材料,对数控旋转超声加工的工艺进行了初步试验研究,分析了材料去除的机理,通过工艺试验探讨了磨料粒度、工具旋转转速、工作台进给速度、分层厚度等工艺参数对材料去除率的影响。
6)  polished material volume
材料去除量
补充资料:耦中有耦
      中国北宋王安石提出的重要哲学命题。出自其《洪范传》。"耦"即"对",王安石用以表述对立的概念。他认为,宇宙万物是由水、火、木、金、土五种物质元素构成的。五行具有"时"、"位"、"材"、"气"、"性"、"形"、"事"、"情"、"色"、"声"、"臭"、"味"等属性。不同元素的同一属性是两两相对的。如就"位"言,火上而水下;就"性"言,水润而火熯;就"形"言,水平而火锐;就"材"言,火革而金从革。他把这种对立,叫作"五行之为物,其时、其位、其材、其气、其性、其形、其事、其情、其色、其声、其臭、其味,皆各有耦"。他又认为,每一元素的不同性质,如"气"与"味"之间也存在着对立:"生物者,气也;成之者,味也。以奇生则成而耦,以耦生则成而奇。寒之气坚,故其味可用以耎;热之气耎,故其味可用以坚。风之气散,故其味可用以收;燥之气收,故其味可用以散。"由于这种对立处于各元素的对立之中,故王安石称之为"耦之中又有耦"。他认为,由于五行"皆各有耦"、"耦之中又有耦"、"万物之变遂至于无穷"。
  
  王安石"耦中有耦"的命题,揭示了世界处于无穷无尽矛盾之中的状况,猜测到宇宙万物发展的根本原因。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条