说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 磁流变(MR)阻尼器
1)  magnetorheological (MR) damper
磁流变(MR)阻尼器
1.
In this dissertation, the seismic responses analysis and Magnetorheological (MR) damper control for the long-span bridges under multi-support excita.
本论文对大跨度桥梁的多点激励地震反应分析与磁流变(MR)阻尼器控制进行了系统的研究,主要创新工作与成果包括以下几个方面:(1)推导了多点地震激励下大跨度桥梁的基本运动方程,建立了确定性地震行波激励下大跨度桥梁地震反应的两种求解方法,即振型叠加法和状态向量法。
2.
A trust-region based instantaneous optimal semi-active control algorithm for magnetorheological (MR) dampers is proposed in this paper.
提出了一种基于信赖域方法的磁流变(MR)阻尼器瞬时最优半主动控制算法。
2)  magnetorheological(MR) damper
磁流变(MR)阻尼器
1.
The influence of control force amplitude of magnetorheological(MR) damper on semi-active control effects is discussed.
研究了磁流变(MR)阻尼器控制力幅值对结构半主动控制效果的影响。
3)  MR-J damper
MR-J型磁流变阻尼器
4)  MR damper
MR阻尼器
1.
Dynamic model of hybrid system with dual-rollers FPS and MR damper and its simulation;
滚动FPS和MR阻尼器混合基础动力学模型及仿真
2.
Semi-active logic control method of seismic response of tall buildings with podium structure using an MR damper;
MR阻尼器耦联的带裙房高层建筑的半主动逻辑控制方法
3.
58 m long stay cable and a set of MR dampers.
试验时改变MR阻尼器的输入电压来改变MR阻尼器的输出力。
5)  MR dampers
MR阻尼器
1.
The nonlinear parameter model(NLP Model) that can effectively depict the inherent hysteretic characteristics of MR dampers is set up based on the mechanical property experiment of magnetorheologic dampers,and the model is developed by integrating the improved Bingham model and a nonlinear spring element in series.
在磁流变(magnetorheologic简称MR)阻尼器力学特性试验的基础上,建立了能够很好地描述MR阻尼器非线性滞回特性的非线性参数模型,该模型由一个改进的Bingham模型和一个非线性弹簧单元串联而成。
2.
and then,establish the revised Bingham model for MR dampers.
自制了内置弹簧蓄能器的新型MR阻尼器,将自制的MR阻尼器在武汉理工大学测试中心完成了性能测试。
3.
The semi-active control for structures can be realized by utilizing the characteristics of adjust ̄able damping force of MR dampers.
利用MR阻尼器阻尼力可以调节的特性能实现对结构响应的半主动控制,直接根据结构的响应对MR阻尼器实施状态跳跃控制。
6)  MR damper
MR 阻尼器
1.
The basic demands of MR Fluid for MR damper were generalized.
对 MR 阻尼器的基本工作模式和原理进行了分析,总结了 MR 阻尼器对磁流变液性能的基本要求, 从阻尼间隙宽度、活塞有效长度、活塞及活塞杆直径等方面分析了 MR 阻尼器结构参数的设计原则,探讨了 MR 阻尼器的线圈缠绕方式确定、磁芯材料选择和磁路计算方法,概括了 MR 阻尼器设计中应注意的关键性技术问题,可为磁流变器件的设计提供技术参考和经验借鉴。
补充资料:阻尼型电容分压器(见分压器)


阻尼型电容分压器(见分压器)
damped capacitor voltage dividers

阻尼型电粤万压藉一”divider尽)见分压器(dam卯d eapaei、orvoltage
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条