说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 机冷车
1)  mechanical refrigerator car
机冷车
1.
The features of the control system of existing mechanical refrigerator cars and the problems existing in operation are analyzed.
分析了现有机冷车控制系统的特点及运营中存在的问题,提出建立远程诊断与修复系统,并对其功能进行了阐述。
2.
The trial operation of the trainset of the B 23A mechanical refrigerator cars on which one refrigerator set is mounted on a car is described.
介绍了我国铁路首批单辆机冷车安装单台制冷机组的 B23 A 型机冷车组的试运情况,并结合我国铁路冷藏运输的现状,阐述了每辆机冷车安装2 台或单台双系统制冷机组的理由,提出了几点建议。
2)  hold-over plate refrigerated vehicles
机械冷板冷藏车
1.
The discharging period that the hold-over plate of hold-over plate refrigerated vehicles was the key to guarantee the goods quantity,but the discharging of hold-over plate was affected by many factors,and it caused the phenomenon that the discharging asymmetry.
机械冷板冷藏车冷板的放冷情况决定了车内货物存放的时间,而放冷过程受到多种因素的影响,从而造成冷板放冷不均匀的现象。
2.
The discharging period that the hold-over plate of hold-over plate refrigerated vehicles was the key of guaranteeing the goods quantity,but the discharging of hold-over plate was affected by many factors,and it aroused the phenomenon of the discharging asymmetry.
机械冷板冷藏车冷板的放冷是保证货物质量的一个关键,而放冷过程受到多种因素的影响,从而造成冷板放冷不均匀的现象。
3)  mechanically freezing-plate refrigerator car
机械冷板冷藏车
1.
Technical and economical analysis on new type mechanically freezing-plate refrigerator car;
新型机械冷板冷藏车的技术经济分析
2.
Fuzzy evaluation for the operating mode of mechanically freezing-plate refrigerator car;
机械冷板冷藏车运用模式的模糊评估
4)  cooling pallet
带冷机台车
1.
By repair and reuse of the old cooling pallet,the pallet lifetime was extend to more than two years and obvious benefit has been obtained in JIGANG №1.
通过焊补、喷涂等手段修复带冷机台车的变形和磨损以及局部更换台车零部件等 ,可使大修中更换下来的旧台车恢复原有的技术性能 ,延长其使用寿命。
5)  mechanical refrigerator car
机械冷藏车
1.
The structure of the 160 km/h special mechanical refrigerator car is described, and the operation way of the car is discussed.
介绍了160km/h特种机械冷藏车的结构,并对其运用方式进行了探讨。
2.
On the basis of the present conditions of the railway refrigerator cars and the development of the storage battery technology,the conception to develop the mechanical refrigerator car of electricity storage type is put forward.
根据铁路冷藏车辆面临的现状及蓄电池技术的发展 ,提出了发展蓄电型机械冷藏车的构想 ,并探讨了蓄电型机械冷藏车的主要技术参数、初步技术方案和关键技术问题 ,为冷藏运输工作者提供了参
3.
The changing law of the temperature field after the mechanical refrigerator car being loaded is revealed.
揭示了机械冷藏车装货后温度场的变化规律,指出影响温度场的因素,认为装载方式对温度场的影响最大。
6)  single mechanical refrigerator car
单节机冷车
1.
The problem that the temperature of B 10B type single mechanical refrigerator car is difficult to be controlled in operation is analyzed.
对 B1 0 B型单节机冷车运用中温度准以控制的问题进行了分析 ,有针对性地提出解决办法。
补充资料:自动冷镦机、多工位螺栓自动冷镦机
代码:00468
设备名称:自动冷镦机、多工位螺栓自动冷镦机
型号规格:机制件杆部直径≥20mm
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB9166-88、JB/T3053-91
1、冲头夹持器模孔中心线对夹持器后支承面的垂直度(mm) 在100长度上
0.0080.010.015>0.015 
2、凹模座模孔中心线对凹模后座支承面的垂直度(mm) 在100长度上
0.0080.010.015>0.015 
3、冲头夹持器模孔中心线对滑块行程的平行度(mm) 在100行程上
0.0160.020.02>0.02 
4、滑块行程对机身上与凹模座贴合的垂直面的垂直度(mm) 在100行程上
0.0160.020.02>0.02 
5、工件头部对工件杆部中心线的偏移量(mm)
<0.200.20~0.250.25~0.30>0.30 
(二)生产率(件/分)
     
20mm
>807065<65 
30mm
>605045<45 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条