说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 电压安全裕度
1)  Voltage security margin
电压安全裕度
2)  minimum voltage security margin
最小电压安全裕度
1.
This method can deal with the difficulties of determining minimum voltage security margin index to a certain extent.
该方法可在一定程度上解决确定最小电压安全裕度指标的困难,通过最小电压安全裕度模糊参数,实现对该指标的松弛处理。
3)  general extent of voltage security
综合电压安全裕度
4)  safety margin
安全裕度
1.
On the basis of the analysis of the causes of traffic accidents,this paper gives the definition of safety margin and builds up the configuration of the accident model.
提出机动车驾驶员安全裕度的概念,对道路交通事故进行成因分析,在此基础上建立了事故成因层次结构模型,运用层次分析法确定道路交通事故成因权重,打破了以往只考虑数量的单一因素的分析方法,综合考虑了人、车、路、环境对交通事故的影响作用,比较客观地得出了道路交通事故主要成因,并提出预防对策。
2.
A grids method is adopted to analyse the deformation character, deformation path, deformation degree and safety margin in dangerous area which is determined by finite-element simulation and experiment.
轿车水槽零件拉延破裂成为稳定生产的主要障碍,采用网格试验法深入分析了毛坯在成形过程中危险部位的变形性质、变形路径、变形大小及安全裕度。
3.
Through analying the mechanical property and metallurgical structure of the visbreaking reactor; testing the temperature of the visbreaking reactor and stress; analying the Safety margin and Service life of the visbreaking reactor.
通过对锦西石化分公司蒸馏减粘反应器筒体材质的机械性能和金相组织检验;减粘反应器温度及应力测试;减粘反应器安全裕度和使用寿命的分析。
5)  Margin of safety
安全裕度
1.
The values of margin of safety for all kinds .
根据NASA提供的校验准则,计算得到了各类连接的安全裕度值。
6)  security margin
安全裕度
1.
The influence of switching off branch on system nodal voltages and line loads is analyzed and the concept of security margin and its calculation formula are given.
分析了支路断开对系统节点电压及线路负荷的影响,给出安全裕度概念和计算公式。
2.
Based on the sensitivity of transient voltage security margin with respect to reactive power injection, a power system can be divided into control areas for preventive control of transient voltage security.
为了优化暂态电压安全的预防控制,根据暂态电压安全裕度对于各节点无功功率的灵敏度系数,将暂态电压不安全点与注入点进行关联分区。
补充资料:安全电压
分子式:
CAS号:

性质:又称安全特低电压,指保持独立回路的,其带电导体之间或带电导体与接地体之间不超过某一安全限值的电压。中国国家标准规定工频电压有效值的限值为50V、直流电压的限值为120V。中国标准规定工频电压有效值的额定值有42V,36V,24V,12V和6V。特别危险环境中使用的手持电动工具应采用42V安全电压。有电击危险环境中使用的手持照明灯和局部照明灯应采用36V或24V安全电压。金属容器内、特别潮湿处等特别危险环境中使用的手持照明灯应采用12V安全电压。水下作业等场所应采用6V安全电压。具有安全电压的设备即III类设备。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条