说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 测量断面
1)  measured profile
测量断面
2)  section surveying
断面测量
1.
The development & application programs of the automatically collecting,communicating,processing data in The Section Surveying were discussed systemically on the Topcon 210/220/310 & 600 serials ETS(Electronic Total Station) with the CPU in the paper.
本文系统地介绍了拓普康(Topcon)210/220/310系列及600系列带有内存的全站仪在断面测量中进行自动数据采集过程以及数据传输及处理程序的开发应用。
2.
This paper presents a method of road section surveying.
提出在道路断面测量中,使用电子手簿与全站仪配合,利用电子手簿的计算功能,实时计算出当前测量点的里程与偏距,与测量的坐标点与高程结合,获得断面测量数据,实现断面测量的方法。
3)  section survey
断面测量
1.
The basis has been established to carry out section survey.
简述了RTK坐标法断面测量原理,提出了断面筛选及转换为标准断面数据DH格式的程序设计方法,以提高断面测量的作业效率和成果精度。
2.
Combined the methods of the ground and underground traverse survey with elevation leveling survey,and considering the result of tunnel section survey and detection of ground penetrating radar,the southwest side cable tunnel and cable conductors outside the tunnel on the crossing of main arterial highway and subordinate highway in the city were surveyed,and the surveying result was obtained.
综合采用井上、井下导线测量和高程水准测量方法,结合隧道断面测量和地质雷达探测结果,对某城市次干道与主干道相交处西南侧电缆隧道及隧道外电缆线进行测量,并综合测量结果,确定了该次干道原设计匝道与主干道下方电缆隧道及其附属设施的具体位置和顶板标高,以及110 kV电缆的平面位置、标高和与隧道的连接位置,获取了修改原设计方案的资料。
3.
Based on road design information,we derived coordinates of arbitrary points in the pile and cross-sectional azimuth which may guide global positioning system(GPS) surveying in section surveys.
根据道路设计信息,推导出线路坐标系下任意中桩点的坐标计算公式和横断面方位角,由计算得到的横断面方向指导野外GPS断面测量。
4)  cross-section surveying
断面测量
1.
This paper incorporated with wireless communication, high precision GPS position, and electrical map technologies, studied how to develop navigation and surveying system fitted for Yellow-River cross-section surveying based on PDA.
结合无线通讯技术、高精度GPS定位技术以及电子地图技术等,研究开发适合于黄河河道断面测量需要的基于PDA的电子地图导航测量系统,把电子地图导航技术和GPS精密定位技术集成为一体,便于依据电子地图快速找到断面位置和断面桩点,并实现了断面测量数据的实时存储、计算、入库等,有利于数据的现场检核与数据安全。
5)  cross section measurement
断面测量
1.
Application of prismatic-free ETS technology in cross section measurement of Changqi irrigation area;
无棱镜全站仪测量技术在长岐灌区断面测量中的应用
2.
Through the practical accumulation and daily application in usual engineering,the cross section measurement mechanism was analyzed.
通过平时在工程中的实践积累以及日常应用,分析了断面测量的原理,主要介绍了利用计算机中的常用办公软件来批量生成断面图的步骤,提出了具体的注意事项,从而帮助工程技术人员方便地绘制断面图。
6)  section measurement
断面测量
1.
This paper analyzes the general structure,system function,operation flow of section measurement and researches the methods of data collection,processing procedure and output for the application to manufacture.
阐释了断面测量系统的总体结构、系统功能、操作流程,研究数据采集方法,处理过程,输出方法,以便在生产中的应用。
2.
Using total-station equipment in field operation observation can transform the traditional section measurement into coordinate measurement of foregone station setting so as to improve working efficiency.
借助编程计算器进行曲线数据计算、坐标系旋转计算 ;全站仪进行外业观测能将传统的断面测量方法转换成已知点设站的坐标测量 ,从而大幅度提高工作效率。
3.
Some conclusions were made from the analysis of technical problems in waterway section measurement and quality inspection.
结合工程实例对全自动数字化水深测量系统工作原理及作业方法进行了阐述,同时对航道断面测量及质量检验中的技术问题进行分析,得出了一些有意义的结论,该方法成果具有准确可靠、效率高等特点,值得推广应用。
补充资料:异形断面钢材(见异形断面型材)


异形断面钢材(见异形断面型材)
special section steel

,一、u以uu、’“飞豆on gQngC01异形断面钢材(speeial Seetion steel)见异形断面型材。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条