1) oscillating cylinder
振荡圆柱
1.
Aiming at the problem of flow around oscillating cylinder concerned in engineering, a circular cylinder oscillating transversely in a uniform stream is simulated by solving the N-S equations with SIMPLE algorithm in the system of colocated grids and dynamic mesh simulating moving boundary of the cylinder.
针对工程中关心的振荡圆柱绕流问题,采用同位网格系统中的 SIMPLE算法求解 N S方程,以及动网格技术模拟圆柱的运动边界,对均匀来流中的横向振荡圆柱绕流场进行数值模拟,计算了振荡圆柱升力系数、阻力系数随时间的变化曲线,以及不同相位时的流线矢量图和涡量等值线分布图。
2.
Numerical simulation of oscillating cylinder in water at rest is done by RANS equation and dynamic mesh method.
通过直接求解原始变量法的NS方程并应用运动网格技术对静止水中的振荡圆柱粘流场进行了数值模拟,计算了KC数在4种流态区下的振荡圆柱流场并分析了对圆柱受力的影响。
2) forced oscillating cylinder
圆柱受迫振荡
3) rotary oscillating circular cylinder
旋转振荡圆柱
1.
In this paper, the wave-current flow past a rotary oscillating circular cylinder for Re=1 568, KC=8, γ=1, a = 2,ft = 0.
0时波流共同作用下旋转振荡圆柱的绕流问题。
4) oscillating water column
振荡水柱
1.
Experimental and Numerical Investigation of Oscillating Water Column Wave Energy Convertor;
岸式振荡水柱波能发电装置的试验及数值模拟研究
2.
The caisson structure of breakwaters has been widely used, the onshore Oscillating Water Column (OWC) structures for electricity generation ,on the other hand, is one of the most promising type in the wave energy conversions.
长期以来,随着港工技术发展,沉箱防波堤断面结构形式已日趋成熟;在海洋波浪能开发领域,岸式振荡水柱波力发电装置已成为目前世界上应用最为广泛的波能转换利用装置。
5) elliptic oscillation
椭圆振荡
6) oscillating circular cylinder
振动圆柱
1.
1, the flow about an oscillating circular cylinder at Re = 100 was studied in this paper.
1并结合其动网格技术和UDF功能,本文研究了在雷诺数Re=100时振动圆柱的绕流问题。
补充资料：55°圆柱管螺纹的型式和尺寸
| 螺纹代号 | 基本尺寸 | 大径 mm d=D | 螺距 mm p | 每英寸牙数 tpi | 中径 mm d2=D2 | 小径 外螺纹 d3 | 牙型高度 H1 | 底孔尺寸 mm | |
| G 1/8 | 1/8＂ | 9.728 | 0.907 | 28 | 9.147 | 8.566 | 0.581 | 8.7 | |
| G 1/4 | 1/4＂ | 13.157 | 1.337 | 19 | 12.301 | 11.445 | 0.856 | 11.6 | |
| G 3/8 | 3/8＂ | 16.662 | 1.337 | 19 | 15.806 | 14.95 | 0.856 | 15 | |
| G 1/2 | 1/2＂ | 20.955 | 1.814 | 14 | 19.793 | 18.631 | 1.162 | 19 | |
| G 5/8 | 5/8＂ | 22.911 | 1.814 | 14 | 21.749 | 20.587 | 1.162 | 20.75 | |
| G 3/4 | 3/4＂ | 26.441 | 1.814 | 14 | 25.279 | 24.117 | 1.162 | 24.5 | |
| G 7/8 | 7/8＂ | 30.201 | 1.814 | 14 | 29.039 | 27.877 | 1.162 | 28 | |
| G 1 | 1＂ | 33.249 | 2.309 | 11 | 31.77 | 30.291 | 1.479 | 30.5 | |
| G 1 1/8 | 1 1/8＂ | 37.897 | 2.309 | 11 | 36.418 | 34.939 | 1.479 | 35 | |
| G 1 1/4 | 1 1/4＂ | 41.91 | 2.309 | 11 | 40.431 | 38.952 | 1.479 | 39.5 | |
| G 1 3/8 | 1 3/8＂ | 44.323 | 2.309 | 11 | 42.844 | 41.365 | 1.479 | 41.5 | |
| G 1 1/2 | 1 1/2＂ | 47.803 | 2.309 | 11 | 46.324 | 44.845 | 1.479 | 45 | |
| G 1 3/4 | 1 3/4＂ | 53.746 | 2.309 | 11 | 52.267 | 50.788 | 1.479 | 51 | |
| G 2 | 2＂ | 59.614 | 2.309 | 11 | 58.135 | 56.656 | 1.479 | 57 | |
| G 2 1/4 | 2 1/4＂ | 65.71 | 2.309 | 11 | 64.231 | 62.752 | 1.479 | 63 | |
| G 2 1/2 | 2 1/2＂ | 75.184 | 2.309 | 11 | 73.705 | 72.226 | 1.479 | 72.5 | |
| G 2 3/4 | 2 3/4＂ | 81.534 | 2.309 | 11 | 80.055 | 78.576 | 1.479 | 79 | |
| G 3 | 3＂ | 87.884 | 2.309 | 11 | 86.405 | 84.926 | 1.479 | 85.5 | |
| G 3 1/4 | 3 1/4＂ | 93.98 | 2.309 | 11 | 92.501 | 91.022 | 1.479 | 91 | |
| G 3 1/2 | 3 1/2＂ | 100.33 | 2.309 | 11 | 98.351 | 97.372 | 1.479 | 97.75 | |
| G 3 3/4 | 3 3/4＂ | 106.68 | 2.309 | 11 | 105.201 | 103.722 | 1.479 | 104 | |
| G 4 | 4＂ | 113.03 | 2.309 | 11 | 111.55 | 110.072 | 1.479 | 110.5 | |
| G 4 1/2 | 4 1/2＂ | 125.73 | 2.309 | 11 | 124.251 | 122.772 | 1.479 | 123 | |
| G 5 | 5＂ | 138.43 | 2.309 | 11 | 136.951 | 135.472 | 1.479 | 136 | |
| G 5 1/2 | 5 1/2＂ | 151.13 | 2.309 | 11 | 149.651 | 148.172 | 1.479 | 148.5 | |
| G 6 | 6＂ | 163.83 | 2.309 | 11 | 162.351 | 160.872 | 1.479 | 161.5 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条