说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 冷热电联产(CCHP)
1)  cool & heat cogeneration
冷热电联产(CCHP)
2)  combined cooling heating and Power (CCHP)
冷热电三联供系统(CCHP)
3)  CCHP
冷热电联产
1.
Design performance of internal combustion engine CCHP system;
内燃机冷热电联产系统设计点性能分析
2.
Comparison Between Gas Engine and Gas Turbine CCHP Systems;
燃气内燃机与燃气轮机冷热电联产系统的比较
3.
The CCHP System Using Natural Gas as Fuel;
以天然气为燃料的冷热电联产系统
4)  CCHP
热电冷联产
1.
Analysis of Economical Sensibility on CCHP by Back Pressure Steam Turbines for Heat Sources;
背压机组作热源热电冷联产的经济敏感性分析
2.
Analyses on energy saving project of a LNG-CCHP system in Xiamen eastern natural gas power plant;
厦门东部燃气电厂LNG热电冷联产系统节能方案研究
3.
In the text, first introduce the constitute, principle and characteristics of the cchp system which is a comprehensive energy system; in the follow.
本文从热电冷联产的工程实际出发,运用建立在火用分析基础上的热经济学的观点,以燃气蒸汽联合循环及其热电冷三联供的整个系统作为研究对象,对热电冷联合生产系统进行较为系统、深入的经济性研究。
5)  combined cooling heating and power
冷热电联产
1.
Research on the energy saving innovation of combined cooling heating and power on power plant
某热电厂实施冷热电联产的节能分析
2.
The paper introduces the characters of the small-sized combined cooling heating and power system and its main equipments.
介绍了小型冷热电联产系统的特点和主要设备的现状。
3.
Economical analyses of combined cooling heating and power: a case study;
以某地区实际运行的数据为基础 ,对冷热电联产用户侧和电厂侧的经济性进行了分析。
6)  tri-generation
热电冷联产
1.
A mathematical model characterizing a tri-generation system through the condition of primary energy conservation compared to the separate production of heat,cooling and power was developed.
从系统基础能源消耗角度建立联产系统相对于分产系统节能判断关系式,并以实际热电机组为例进行计算验证,探讨了热电比、热效率、性能系数等参数对联产系统能耗特性的影响,研究发现:热电联产及在此基础上的热电冷联产的节能需满足一定的条件,相对来讲,冷电联供节能条件较热电联产更为苛刻。
补充资料:厂用电受电


厂用电受电
energizing of auxiliary power system

chongyongd一on sho一Jd一on厂用电受电(energizing of auxiliary powersystem)机组附属设备安装完毕后需通电试运行,所需厂用电源由外部供给,因此厂用电受电是调试工作开始的标志。 受电步骤新建电厂先由电力系统向变电站供电,再依次对高压起动/备用变压器、3~10kv厂用配电装置、厂用工作变压器及380V配电装置供电。扩建电厂因高压起动/备用变压器已经投人运行,故可利用它的电源对扩建的厂用配电装置等供电。 调试项目主要有:①用额定电压依次对空载线路、变电站母线、隔离开关、断瘩器、互感器、变压器及厂用配电装置等进行冲击合闸试验。有条件时.冲击合闸前应先进行递升加压试验。升压过程中注意检查各设备有无放电声及短路现象,发现问题及时处理后再进行升压。②检查三相电压应平衡,相序应正确,各段母线的相位彼此应一致。对配电装置供电时,有时会由于母线电容和与母线连接的电磁式电压互感器的电感相互作用而出现铁磁谐振,此时相电压升高,中性点明显位移。为消除谐振可在电压互感器的剩余电压绕组处并联电阻以去振。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条