说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 瞬时负荷参数
1)  instantaneous load parameter
瞬时负荷参数
2)  Cold load instantaneous coefficient 
冷负荷瞬时系数
3)  instantaneous load
瞬时负荷
1.
According to the working procedure of the shearer,this paper studied the instantaneous load about helix drum,created the mathematical model of load fluctuation and put forward the appraising method and standard about the smooth of the working helix drum.
根据采煤机滚筒截煤过程及其截齿受力状况的分析 ,研究了截齿处于截割断面的不同位置角时的滚筒瞬时负荷。
4)  Instantaneous excessive load
瞬时过负荷
5)  instantaneous parameter
瞬时参数
1.
The Hilbert transform was applied to give the expression of instantaneous parameters of the signals.
为提高机械变速过程中振动信号分析的准确性,通过分析旋转机械的变速测量过程,建立了变速测量方式与信号时变统计特性之间的非线性变换关系,并引入希尔伯特变换确定信号的瞬时参数。
2.
This paper introduces the definition of Hilbert transform, expounds how to implement the analytic representation of narrowband signal with Hilbert transform, and analyzes the requirements of obtaining the instantaneous parameters with Hilbert transform for the signals.
介绍了Hilbert变换的定义,论述了如何通过Hilbert变换实现实窄带信号解析表示,分析了用Hilbert变换正确求取瞬时参数时对信号的要求。
3.
The instantaneous parameter estimation for communication signals is very important,for such parameters are abundant of information.
通信信号的瞬时参数包含丰富的信息,提取瞬时参数具有很重要的意义。
6)  instantaneous parameters
瞬时参数
1.
On the basis of introduction to real-time calculation method of signal instantaneous parameters, a new calculation method of instantaneous parameters is presented.
本文在简单介绍了信号瞬时参数实时计算方法的基础上,提出了一种新的基于稳态化假定的瞬时参数计算方法;通过与其它常用方法的对比分析,检验了本文提出的方法的精度和稳定性。
2.
In many practical fields, it is quite important to extract the instantaneous parameters of a signal.
在许多实际问题中,信号瞬时参数的提取有重要意义。
补充资料:RSCG01-5000管式超高温瞬时(UHT)杀菌机

应用:
应用于乳品、果汁或茶等流体物料,在管式热交换器中对物料进行超高温瞬时杀菌处理(UHT)。

工作原理:
该设备为全自动设备,其运行操作可以分为以下四个步骤:
1. 设备预杀菌
2. 物料杀菌
3. 无菌中间清洗
4. 最终清洗
     在正式生产前,设备在高压下进行30分钟的热水循环,以完成对设备物料通道的预杀菌处理,随后,将设备逐步冷却到生产温度,然后进入待料状态。
当下游设备(包装机、无菌罐等)准备就绪后,即可进行生产(物料杀菌)。
每个生产周期结束后,都要用碱液或酸液对系统进行清洗。
在设备的设计中采用了再生热交换技术,提高热传输效率,节约能源。

设备组成及技术指标:
由物料桶、输送泵、管式换热器、保持器、过热水系统、CIP清洗系统及控制系统等组成。
操作系统采用图象式人机对话操作界面,便于随时直观地掌握设备各组件的运行状态;控制系统对设备进行温度实时控制、采集和存储。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条