1)  reference coordinate
基准坐标系
1.
The reason of taking the reference coordinate to compute the metro equipment gauge in curve segment, the basic computing method, and the method to compute the building gauge with the equipment gauge are introduced.
对《地铁设计规范》附录A中的曲线地段设备限界计算原理进行了分析,阐述了采用基准坐标系作为曲线设备限界坐标系的缘由和建立曲线地段设备限界计算模式的基本原则,简要介绍了设备限界计算程序和如何制定建筑限界。
2)  frame of reference
基准(坐标)系
3)  criteria
基准
1.
Methods for developing nutrient criteria in estuarine waters;
河口区营养物基准制定方法
2.
The water quality criteria(WQC) and water quality standard(WQS) are the managed basis for the environmental water quality control aim.
水环境质量基准与标准是有效实施环境水质目标的主要基础和管理依据。
3.
Starting from discriminating concepts,the difference between water quality criteria and standards are distinguished,and their relationship in total amount control of water pollutants is analyzed.
辨析了水环境质量基准与标准的概念差异,指出了它们对水污染物总量控制的作用。
4)  benchmark
基准
1.
The dynamic portfolio decision-making model with three-fund separation theorem based on stochastic benchmark;
基于随机基准的三基金定理动态决策模型
2.
Technological dimension chain is mainly used to fix the size and deviation when benchmark is not coincident.
工艺尺寸链主要用于基准不重合时工序尺寸及其偏差的确定,主要探讨工艺尺寸链在精度分析、粗基准选择和定位方案判定这三个方面的应用。
5)  reference
基准
1.
Analyse of reference s selection of revolution parts in machine design;
机械设计中对回转体零件基准选择的分析
2.
As a result, the optimum marking method and the relation between concentricity and reference can be concluded, thus improving the concentricity of the hole throats on both ends of the carrier roller.
通过对不同的标注形式进行工艺分析,提出对应的加工及检测方法,得出最佳标注方法及同轴度与基准选择的关系,达到提高托辊两端孔颈同轴度的目的。
3.
This article has described the reference selection,the accuracy control,the cutter selection and chucking method for the machining of the die plate used for certain military product.
介绍了某军工产品模板加工的基准选择、精度控制、装卡方式、刀具选用等。
6)  Standard
基准
1.
Standard adjustment for the air splicer of Automatic winder;
自动络筒机空气捻接器基准的调试
2.
The Analysis for Three Chief Standards of Leading Industry Selection;
对主导产业选择三大基准的分析
3.
This paper introduces a new method to create a precision standard for installing andcalibrating large mechanism using steel wire stretched,capacitance sensor and multi-function gauges.
介绍一种大型机械安装校准的新方法,论述了利用拉直的钢丝和新型电容测微仪及多功能核准检具对大型机械安装校正给定高精度基准的方法。
参考词条
补充资料:使用基准显示对话框设置基准的显示

使用“基准显示”(Datum Display) 对话框,可以独立于基准图元的名称(标签)指定单个基准图元的显示状态。单击“视图”(View)>“显示设置”(Display Settings)>“基准显示”(Datum Display),打开“基准显示”(Datum Display) 对话框。


对话框中有下列基准显示选项:


基准平面 (Datum Planes) - 显示基准平面及其名称。也可使用配置文件选项 display_planes 来设置。


基准平面标签 (Datum Plane Tags) - 显示基准平面名称。也可使用配置选项 display_plane_tags 来设置。


基准轴 (Datum Axes) - 显示基准轴及其名称。也可使用配置文件选项 display_axes 来设置。
轴标签 (Axis Tags) - 显示基准轴名称。也可使用配置选项 display_axis_tags 来设置。


点符号 (Point Symbols) - 显示基准点及其名称。也可使用配置文件选项 display_points 来设置。


点标签 (Point Tags) - 显示基准点名称。也可使用配置文件选项 display_point_tags 来设置。


坐标系 (Coordinate Systems) - 显示坐标系及其名称。也可使用配置文件选项 display_coord_sys 来设置。


坐标系标签 (Coordinate System Tags) - 显示坐标系名称。也可使用配置选项 display_coord_sys_tags 来设置。


旋转中心 (Spin Center) - 显示旋转中心符号。也可使用配置文件选项 spin_center_display 来设置。


曲线标签 (Curve Tags) - 显示曲线名称。也可使用配置选项 curve_tag_display 来设置。


使用“全选”(Select All) 或“取消全选”(Unselect All) 按钮,可一次显示或隐藏全部基准图元。


在“点符号”(Point Symbol) 下,可以指定想要用于指定点的符号类型。选项有“十字”(Cross)、“点”(Dot)、“圆”(Circle)、“三角形”(Triangle) 和“正方形”(Square)。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。