说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 公差尺寸文本
1)  tolerance dimension text
公差尺寸文本
2)  tolerance [英]['tɔlərəns]  [美]['tɑlərəns]
尺寸公差
1.
Research on Methods of Dimensioning the Tolerance Based on AutoCAD
基于AutoCAD的尺寸公差标注方法研究
2.
An ideal boundary, which stands for the limit condition of real feature under meeting design demands, can be formed by suitable dimensional and geometrical tolerances.
理想边界是由尺寸公差和形位公差综合形成的 ,它代表实际要素在满足设计要求条件下的极限状态 。
3.
Drawing the mechanical engineering drawing usually need to mark the dimension tolerance of the parts.
绘制机械工程图经常要标注零件的尺寸公差。
3)  dimensional tolerance
尺寸公差
1.
Interactive inquiry and automatic marking of dimensional tolerance on AutoCAD;
AutoCAD中尺寸公差的交互式查询及自动标注
2.
Mathematical model of dimensional tolerance of straight line based on variation along DOF
基于自由度变动的直线尺寸公差数学模型
3.
The thesis,by method of drawing dynamic tolerance range picture,vividly analyses inter-compensation among dimensional tolerance,position tolerance and form tolerance.
本文通过画动态公差带图,形象的分析了尺寸公差和形位公差之间的补偿关系,为解决实际问题提供了很好的方法。
4)  dimension tolerance
尺寸公差
1.
Inter compensation between dimension tolerance and shape-position tolerance;
论尺寸公差和形位公差的相互补偿
2.
Analysis and discussion of inland and overseas cold roll electric steel dimension tolerance;
国内外冷轧电工钢尺寸公差分析及探讨
3.
Study on parametric program for checking dimension tolerance in mechanical design CAD;
机械CAD中尺寸公差参数化的研究与实现
5)  Size tolerance
尺寸公差
1.
We calculate and analyze the mutual compensation between size tolerance and form & position tolerance while applying“the minimun material requirement” to the tested essential factors and standard key elements.
对被测要素、基准要素在应用“最小实体要求”时 ,尺寸公差与形位公差相互补偿问题进行计算分析。
2.
It particularly points out the relations between shape and position tolerance, size tolerance and surface rough degree.
分析了尺寸工差、形位公差及表面粗糙度选择的一般原则与方法,着重指出形位公差与尺寸公差、表面粗糙度之间的关系,通过其间关系可以比较正确和合理地选择各项公差的公差等级和数值。
6)  dimensional tolerances
尺寸公差
补充资料:Pro/Engineer Drawing 工程图尺寸公差
1 建立公差

选择DRAWING- > Advanced > Tol Setup > Standard > ISO/DIN ., 即可建立基于iso的公差


· 2 改变公差等级


菜单 DRAWING- > Advanced > Tol Setup > Model Class >选择四种选项的一种:


可以利用命令 TOL SETUP > Tol Tables>来修改/调入/保存/显示 公差表


· 3 修改公差类 型



  1. 选择菜单: DETAIL > Modify > Dimension .
  2. 选择尺寸,确认
  3. 在公差模式 (Tolerance Mode) 框中,选择一种,并确定相应的公差值。
  4. ok

· 4 修改公差值


方法1:modify-value,点击公差值数值


方法2:modify-dimensions,修改公差值

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条