1)  safety valves
充气式安全阀
1.
This paper mainly introduces the non-linear characteristic analysis of the air spring of large flow air filled safety valves in powered supporters, non-linear error and the influence caused by the non-Linear on the dynamic characters of safety valve system.
研究结果对充气式安全阀静、动态特性分析及阀的设计具有重要的参考价值。
2)  Charge
充气
1.
Comparative experiments were carried out to study the effect of the adsorption heat on the charge and discharge performances of a hydrogen storage system.
5 MPa下快速充气时,在开始100 s左右,储罐吸附床中心的温升可达42 K;在放气试验中,吸附床中心温度在 10。
3)  Aeration
充气
1.
Study on the Aeration Performance of LHJ Flotation Column;
LHJ浮选柱充气性能的研究
2.
The circular centrifugal flotation cell has many originalities on the pulp aeration, air bubble mineralization, air pulp flow format in the ring shaped tank of the cell, feed method ect, due to the results of fluidics and turbulence and the action of centrifugal and gravitational force ect.
新型高效圆形离心浮选机充分发挥了湍流射流及离心—重力力场的作用,使其在矿浆充气、气泡矿化、浮选槽内矿浆流动形式、给料方式等方面独具特色。
3.
The“dead zone”of particle located at the bottom of annulus can be eliminated,and the effectiveness of solidgas contact,mass and heat transfer can be improved by introducing an auxiliary(aeration or fluidization)fluid into the annular region through a distributor.
在普通喷动床环形区底部引入“充气”可消除环形区底部颗粒“死区”的影响,并能改善环形区气固间的热、质传递。
4)  inflation
充气
1.
Analysis of dynamic simulation and fluid field of parachute in inflation stage;
降落伞主充气阶段的动态仿真及流场分析
5)  inflatable
充气
1.
Simulation analysis of deployment process of inflatable planar antenna structure;
充气平面天线结构展开过程仿真分析
2.
Simulation Prediction of Deployment Dynamics of Inflatable Solar Array;
充气太阳能帆板展开动力学数值模拟预报
6)  aerator tank,aeration tank
充气槽,充气罐
参考词条
补充资料:弹簧式安全阀
分子式:
CAS号:

性质:以弹簧的压力传递到阀盘而封闭阀座的一种安全阀。结构类似于角式截止阀,压力介质处于阀盘下方,当介质压力超过规定值时,将阀盘顶起而泄至外界。改变弹簧的压缩程度,即改变对阀盘的压紧力,就可调节安全阀的工作压力。为防止随便调整弹簧,故有铅封装置。优点是结构紧凑,占地位小。但不适宜高温下工作。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。