说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脊形光波导
1)  rib waveguide
脊形光波导
1.
This paper present a method to analysis arbitrarily shaped rib waveguide.
提出了一种求解任意截面形状脊形光波导的方法 ,先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率 ,再利用转移矩阵的理论求解出波导的模式色散方
2.
Comparsions of single mode waveguide conditions for single mode silicon on insulator (SOI) and GeSi/Si rib waveguides obtained by the effective index method (EIM) and proposed by Soref et al.
用有效折射率方法对SOI(绝缘体上硅 )及GeSi Si脊形光波导的单模条件进行了模拟 ,与Soref的单模条件进行了比较 ,将两者与实验结果进行了比较 ,得到了与实验结果符合得非常好的单模条件。
2)  ridge waveguide
脊形光波导
1.
By using the theory of the five asymmetry planar waveguide and the effective refractive index method(ERIM),the mode characteristics and propagation loss of the optical ridge waveguide,which is covered by the upper and lower electrodes,were analyzed.
用5层非对称平面波导理论和等效折射率法(ERIM)分析了金属电极对聚合物脊形光波导横向模式特性及其传输损耗的影响。
2.
The polymer ridge waveguide is similar in shape to that of normal inorganic ridge waveguide, but it s refractive index distribution is similar to that of inorganic rectangular waveguide.
从理论上推导出聚合物脊形光波导的模式本征值方程,给出了相应的归一化通用曲线,可供相应波导设计和制备作为参考。
3)  rib optical waveguide
脊形光波导
1.
The structure of the polymer rib optical waveguide is designed by using effective index method(EIM),and the mode field distribution in these waveguides is analyzed to determine the suitable structural size range.
利用有效折射率法(E IM)理论设计了有机聚合物脊形光波导结构,并分析光波导中传输的模式场,确定出光波导结构的适宜尺寸范围。
4)  tapered rib waveguides
楔脊形光波导
1.
A method for analyzing the coupling of 3-D tapered rib waveguides with Fibers;
一种分析三维楔脊形光波导与光纤耦合的方法
5)  coupled rib optical waveguides
耦合脊形光波导
1.
The field intensity distributions of the even and odd modes supported by the coupled rib optical waveguides are obtained.
用平面射映边界条件的伽辽金法分析耦合脊形光波导的结果表明 ,耦合脊形光波导的耦合能力随脊高增加而减小 ,随波导间距增加呈指数衰减。
6)  Ridged SiGe-OI optical waveguide
SiGe-OI脊形光波导
补充资料:光波导
光波导
optical waveguide
    由光透明介质(如石英玻璃)构成的传输光频电磁波的导行结构。光波导的传输原理是在不同折射率的介质分界面上,电磁波的全反射现象使光波局限在波导及其周围有限区域内传播。现代应用的光频的波长介于0.8~1.6微米之间。实用光波导有光导纤维、薄膜波导、带状波导3类。光导纤维的一个传输特性是衰减很小、频带很宽、抗电磁干扰,主要用于通信;光导纤维的另一传输特性是对外界的温度和压力等因素敏感,因而可制成光导纤维传感器,用于测量温度、压力、声场等物理量。薄膜波导与带状波导主要用于制作有源和无源的光波导元件,如激光器、调制器和光耦合器等。它们采用半导体薄膜工艺,适合于制成平面结构的集成光路(即光集成部件)。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条