1) Distributed load and thermal load
分布载荷和热载荷
2) load distribution
载荷分布
1.
Simulating test on damage regularities of thick sandy soil layer and load distribution on key roof block in shallow coal seams;
浅埋煤层厚沙土层顶板关键块动态载荷分布规律
2.
Influence of load distribution on dynamic performance of 6-DOF motion platform;
载荷分布对六自由度运动平台动力学性能的影响
3.
A study on load distribution and slip characteristics of metal V-belt CVT;
金属带式无极变速传动的载荷分布及滑移特性研究
3) distributed load
分布载荷
1.
The fuzzy random curve shows that the crash force near the feed opening is bigger than that of other places, and the fuzzy random distributed load can be acquired by v.
模糊随机分布载荷曲线表明,离排放口附近越近的位置破碎力越大;对于不同工作条件下的模糊随机分布载荷,可以通过调整模糊隶属度函数的参数和破碎影响因子获得。
2.
The present paper deals with the elastic stability of clamp-free columms under the action of concentrated end loads and complicated distributed loads.
用能量法对于同时承受端部集中载荷与分布载荷作用下柱体的稳定性问题进行了研究，分别考虑了：①分布载荷为始终沿轴线方向的“非保守型分布载荷”和始终沿初始轴线方向的“保守型分布载荷”；②端部集中载荷与分布载荷是彼此独立的和成比例的，以便使本文的推导及求解更加符合工程中的实际问题。
3.
The concept of surface mobility is introduced to study the identification of distributed loads based on SEA in the paper.
引入面导纳的概念对结构的分布载荷进行识别。
4) load distribution
荷载分布
1.
The settlement and load distribution on the top of group pile foundation at the states of completion of platform,tower,bridge were analyzed.
通过离心模型试验,研究了5种工况下主桥索塔群桩基础的竖向承载变形特性,分析了承台竣工、裸塔竣工、成桥阶段群桩基础的沉降及桩顶荷载分布规律。
5) distribution load
分布载荷
1.
The analysis calculation method for circular plates subjected to distribution load which is continuous and derivable and axial symmetry;
圆板承受连续光滑轴对称分布载荷的解析计算方法
2.
This paper studies the surface and inner of an elastic half space body subjected to axial symmetrical distribution load in order to meet the demand of an actual project and experiment of the rock strength on the spot.
根据实际工程项目和现场岩体力学试验的需要 ,研究了弹性半空间体承受轴对称平衡分布载荷的问题。
6) distributed load
分布荷载
1.
A series of models are presented in this paper which deal with the shear strength analysis of simply-supported concrete beams under distributed load.
本文把斜压场理论和变角软化桁架模型结合起来，采用独特的单元划分方法及一些合理假定，建立了适用于分布荷载下钢筋混凝土简支梁抗剪强度计算的理论模型，并对此进行了实验验证。
2.
In the symplectic system of plane elasticity in rectangular coordinates,by separating variables and abandoning the homogeneous boundary condition,the symplectic solution of a rectangular beam subjected to distributed load in a power function form is obtained.
在弹性力学平面直角坐标辛体系中,采用分离变量法,放弃齐次边界条件,得到了矩形梁侧边受幂函数形式分布荷载问题的辛解答,给出了这类问题在辛体系中的一般解法,分别对矩形梁受法向和切向分布荷载的问题进行了求解,显示了此方法的有效性。
补充资料：载荷(-ｈè)
动力设备、机械设备以及生理组织等在单位时间内所负担的工作量。也指建筑构件承受的重量。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条