1) thin-layer contact element
薄层连接单元
2) laminar layer contact element
薄层接触单元
1.
With considering the construction process of dam sections and nonlinear contact problems of transverse gaps under temperature load,laminar layer contact element model is applied to simulated analysis of temperature and creeped stress for three parting design model which only have transverse gaps.
考虑坝段实际成层浇铸过程和温度徐变作用下坝段横缝的非线性接触问题,采用薄层接触单元模型,利用三维有限单元法对高拱坝陡坡坝段(只存在横缝)三种分缝设置模型进行温度徐变应力仿真分析,依据拉应力最小及分缝拐角距拱端最小距离原则,选择了最佳分缝方案。
3) interface film element
接触面薄层单元
4) thin-layer element
薄层单元
1.
This paper discusses fundamental assumption and simplification of the thin-layer element.
对薄层单元的基本假设和简化进行了探讨并得到如下结论:薄层单元的本构方程可通过横现各向同性体本构方程采用合理简化得到;薄层单元受拉开裂的本构关系可采用分布裂缝模型模拟开裂简化得到;薄层单元采用的基本假设能在一定程度上保证计算精度及简化计算。
2.
5D finite element combined with thin-layer element has been developed to study the dynamic responses of track structure and surrounding ground due to train moving loadings and wave propagation phenomena in three-dimensional ground.
5维有限单元结合薄层单元的高效数值方法来研究铁路轨道和周围地基在列车运动荷载作用下的振动响应以及应力波在三维地基中的传播问题。
5) thin layer element
薄层单元
1.
The ground in the near field was modelled with finite elements,while thin layer elements were used to construc.
5维有限单元结合薄层单元方法,研究了接近或超过临界速度的移动荷载作用下地基三维振动问题。
2.
<Abstrcat>In the Xiluodu Arch Dam aralysis,thin layer element were used for the dam body adjucent to the foundation,different thickness of the thin layer element and the influence of the number of element layers dividing the dam body in the radial direction on the dam stresses obtained have been studied,the principle of grid division for Xiluodu Arch Dam has been determined.
介绍了在溪洛渡拱坝有限元计算中,坝体近坝基部位薄层单元的应用。
3.
Goodman′s zero thickness element and Desai′s thin layer element for interface model are discussed.
讨论了接触面Goodman单元模型和Desai薄层单元模型的特点 ,介绍和分析了笔者提出的接触面薄层单元耦合本构模型。
6) linkage unit
连接单元
补充资料：上位机连接单元
分子式：
CAS号：
性质：可编程控制器术语。它是可编程控制器连接到上位计算机的接口。上位计算机通过它可以与一台或多台可编程控制器联接起来，把数据传输到可编程控制器或从可编程控制器接收数据，实现可编程控制器的集中管理或控制。
CAS号：
性质：可编程控制器术语。它是可编程控制器连接到上位计算机的接口。上位计算机通过它可以与一台或多台可编程控制器联接起来，把数据传输到可编程控制器或从可编程控制器接收数据，实现可编程控制器的集中管理或控制。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条