1) carbon fiber woven cloth
碳纤维编织布
1.
The common-used materials for gas diffusion layer of electrode in proton exchange membrane fuel cell (PEMFC), such as carbon fiber paper, carbon fiber woven cloth, non-woven network and carbon black paper, were evaluated by analyzing the function characteristics and performance specification of gas diffusion layer for PEMFC electrode.
通过分析质子交换膜燃料电池(PEMFC)电极用气体扩散层的功能特点及性能要求,对几种常用于PEMFC电极中的气体扩散层材料,如碳纤维纸、碳纤维编织布、非织造布及炭黑纸等进行了评述,介绍了它们的基底制作工艺及后处理工艺,同时对几种典型的憎水处理方法作了简要的说明。
2) arbon-fiber cloth
碳纤维织布
1.
Methods:The carbon -fiber cloth were embedded in diverse positions of the PMMA dentur e -base.
目的:研究碳纤维织布增强聚甲基丙烯酸甲酯(PMMA)基托的机械性能。
3) 3-D braided carbon fiber
三维编织碳纤维
1.
The XRD, SEM, isothermal oxidation-weight loss and non-isothermal TG-DTG were used to study the properties of SiC coatings/ 3-D braided carbon fiber(composite fiber) prepared by in-situ reaction method.
采用原位反应法在三维编织碳纤维(原纤维)表面制得β-SiC涂层,通过XRD,SEM,等温氧化失重和非等温热重分析等测试手段研究了制备方法对涂层性能的影响。
2.
The SiO2 coating on 3-D braided carbon fiber was prepared by the sol-dipping method.
采用溶胶-浸渍法,成功地在三维编织碳纤维的纤维表面涂覆SiO2,并通过碳热还原反应制得厚度约为0。
4) 3D-braided carbon fiber
三维编织碳纤维
1.
This paper reviews the history of 3D-braided carbon fiber reinforced nylon(C3D/PA) composites, and summarizes the advantages and disadvantages of methods of synthesizing the composites.
介绍了三维编织碳纤维增强尼龙(简称C_(3D)/PA)复合材料的发展历史,并归纳了C_(3D)/PA复合材料几种合成工艺的利弊所在。
5) carbon fiber preform
碳纤维编织物
1.
SiC fillers were introduced into carbon fiber preform by vacuum infiltration in order to shorten the fabrication cycles of three-dimensional braided carbon fiber preform (3D-B C_(f)) reinforced SiC ceramic matrix composites by precursor-infiltration-pyrolysis (PIP).
采用真空浸渍法在碳纤维编织物中预先引入SiC微粉,以缩短先驱体浸渍裂解制备碳纤维三维编织物(3D BCf)增强SiC陶瓷基复合材料的制备周期,考察了微粉粒度、浆料SiC/无水乙醇(EtOH)质量比等参数对引入SiC微粉体积分数的影响。
6) carbon fiber braid
碳纤维缝编织物
1.
Effect of cold plasma treatment on the interfacial properties of carbon fiber braid/epoxy composites;
冷等离子体处理对碳纤维缝编织物/环氧复合材料界面性能的影响
补充资料：聚丙烯腈碳纤维增强体(见聚丙烯腈碳纤维)
聚丙烯腈碳纤维增强体(见聚丙烯腈碳纤维)
carbon fibre reinforcements made of polyacrylonitrile
佩八饰”.限沂维用通体carbon fibre reinforce.ments made of polyaerylonitrile以聚丙烯睛纤维为原料制成的、角于复合材料中起承载增强作用和改善性能的碳纤维(见朵丙烯睛碳纤维).
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条