1) ultra high molecular weight silicone
超高相对分子质量聚硅氧烷树脂
2) high molecular weight epoxy resin
高相对分子质量环氧树脂
1.
Study of high molecular weight epoxy resin;
高相对分子质量环氧树脂的合成
3) polyamide/ultrahigh molecular weight polyethylene
聚酰胺/超高相对分子质量聚乙稀
4) ultra high molecular weight polyethylene
超高相对分子质量聚乙烯
1.
The surface of ultra high molecular weight polyethylene(UHMWPE)fibers was modified by the confected chrome acid treatment solutions.
利用自行研制的铬酸处理液对超高相对分子质量聚乙烯(UHMWPE)纤维进行表面改性,并利用扫描电镜(SEM)、红外光谱(FITR)和接触角、单丝强力试验对纤维的表面性能和强度的变化进行表征。
2.
Sliding plates and idlers for ribbon conveyors were prepared by ultra high molecular weight polyethylene (PE-UHMW) with abrasive resistance and lower friction coefficient to substitute those made of steel.
利用超高相对分子质量聚乙烯 (PE UHMW )优越的耐磨性和低的相对摩擦系数特性 ,制备滑板和托辊在带式输送机上替代钢制托辊。
3.
Reinforced UHMWPE(ultra high molecular weight polyethylene) composite pipes are processed.
研制了超高相对分子质量聚乙烯复合增强管材 ,这种复合增强管分为三层 :内层为超高相对分子质量聚乙烯 ;中间层为钢丝缠绕层 ,作为耐压层 ;外层是聚氯乙烯合金 ,具有良好的刚性、优异的抗冲击性和耐老化性 ,作为保护层。
5) UHMWPE fiber
超高相对分子质量聚乙烯纤维
1.
The drawing parameters of UHMWPE fibers after gel spinning, initial drawing and extraction was decided by theoretical analysis on the drawing temperature and drawing ratio of UHMWPE fibers.
通过对冻胶纺丝、初步拉伸、再萃取后的超高相对分子质量聚乙烯纤维 (UHMWPE)的拉伸温度、拉伸倍数、热定型温度等的理论分析 ,指出 U HMWPE的拉伸温度应设定在熔点附近 ,确定了拉伸倍数及定型时应满足的拉伸倍数公式 ,热定型温度应低于上一道拉伸温度。
2.
Initial modulus of monofilament and multifilament were characterized for the test of UHMWPE fiber(SK75) and aramid fiber(Twaron2000) on a universal Instron Tensile Tester.
采用万能材料试验机对超高相对分子质量聚乙烯纤维(SK75型)和芳纶(Twaron2000型)两种样品的单丝、复丝模量进行了表征。
3.
Study on synthesize and application of neoprene adhesive for UHMWPE fiber;
应用结果表明改性氯丁橡胶粘合剂可用于超高相对分子质量聚乙烯纤维的上胶。
6) ultra-high molecular weight polyethylene
超高相对分子质量聚乙烯
1.
This paper deals with the wear resistances of a composite material consisting of ultra-high molecular weight polyethylene (PE-UHMW) and high density polyethylene (PE-HD) reinforced with carbon nanotubes (CNTs).
主要研究了超高相对分子质量聚乙烯和高密度聚乙烯以及纳米碳管复合材料的制备工艺及其抗磨损性能, 并系统地研究了复合材料中纳米碳管的质量份数、预处理方法以及摩擦对偶材料对复合材料摩擦性能的影响。
2.
The effect of the nano-silica filled in the ultra-high molecular weight polyethylene (UHMWPE) on the resistance to heat was discussed.
文中研究了纳米SiO2填充改性超高相对分子质量聚乙烯(UHMWPE)塑料的耐热性能。
3.
The double-diffusion process between fiber solvent and extracting agent in the extracting system of ultra-high molecular weight polyethylene (UHMWPE) gel fibers was mathematically analyzed, the formula to calculate the diffusion coefficient of fiber solvent was concluded.
对超高相对分子质量聚乙烯(UHMWPE)冻胶纤维萃取体系中溶剂与萃取剂的双扩散过程进行了数学分析,推导出纤维溶剂扩散系数的计算公式。
补充资料：十八烷氧基封端二甲基(硅氧烷与聚硅氧烷)
CAS：68554-53-0
中文名称：十八烷氧基封端二甲基(硅氧烷与聚硅氧烷)
英文名称：Siloxanes and Silicones, di-Me, (octadecyloxy)-terminated
中文名称：十八烷氧基封端二甲基(硅氧烷与聚硅氧烷)
英文名称：Siloxanes and Silicones, di-Me, (octadecyloxy)-terminated
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条