说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 超大型波纹管
1)  super-large size bellow
超大型波纹管
2)  large bellows expansion joint
大型波纹管膨胀节
1.
Based on the local stress strain method, the fatigue life of large bellows expansion joints is predicted.
鉴于大型波纹管膨胀节全尺寸疲劳寿命试验在工程上实现的困难性,研究了基于局部应力-应变法预测大型波纹管的疲劳寿命。
3)  undulating tube model
波纹管模型
1.
The flowing and oil displacement mechanism of viscoelastic polymer solution in undulating tube model conducted by upper-convected Maxwell model were analyzed by reservoir engineering method.
为了了解聚合物溶液的粘弹性在多孔介质中对残余油的作用机理,描述油藏条件下以第一法向应力差为主要特征的聚合物溶液的流变性,采用上随体Maxwell本构方程,对粘弹性聚合物溶液在油藏孔隙模型——波纹管模型中的流动及其驱替残余油膜的机理进行了油藏工程方法分析,在理论上从力学的角度提出了聚合物驱提高驱油效率的机理。
2.
The porous medium in oil poolare simplified the undulating tube models, a mathematical mode is constructed from energyangle, effective numerical methods should be used.
根据真实多孔介质内部流道的收缩和扩张的特性,选取了具有相继收缩和扩张的周期过程,同时又具有几何上的简单性的波纹管模型。
4)  C_shaped bellows
C型波纹管
1.
This is one of the applications of Part(Ⅰ),in which the angular stiffness, the lateral stiffness and the corresponding stress distributions of C_shaped bellows were calculated.
(Ⅲ )是 (Ⅰ )的具体应用· 计算了C型波纹管的角向刚度、横向刚度和相应的应力分布· 将波纹管的凸面和凹面分开处理 ,分别应用一般解 (Ⅰ ) ,使连接点满足内力和变形连续性条件· 所得结果与相应的数值积分解、其它理论解及实验进行了比较· 结果表明 ,中细柔性圆环壳的方程和一般解 (Ⅰ )准确可
5)  U-shaped bellows
U型波纹管
1.
The non-linear integral equations of circular ring shells and truncated shallow conical shells of U-shaped bellows are derived using the Green function method, and the conjunction conditions between circular ring shells and truncated shallow conical shells are applied to determine the four unknown parameters.
采用格林函数法,导出了U型波纹管圆环壳部分和截头扁锥壳部分的非线性积分方程,其中的四个未知参数由圆环壳和截头扁锥壳的连接条件确定。
6)  V-shaped accordion pipe
V型波纹管
补充资料:波纹管泵
分子式:
CAS号:

性质:容积式泵的一种。即泵工作腔为波纹管的往复泵。波纹管与大气隔绝,构成密闭的工作腔。由轴向变形,周期性地改变工作腔的容积,在吸排液阀的配合下,将被送液体吸入并密闭在波纹管内;将能量传递给被送液体使其压力直接增加到需要的数值;再将液体排到泵输出管路中去。完成输送液体。波纹管泵是一种无泄漏泵,其波纹管多以橡胶或塑料制成,适于输送强腐蚀性液体;又不会产生泄漏,也适于输送有毒有害,易燃易爆和贵重液体及含有颗粒和浆状物料,但流量较小,排压较低。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条