说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 导引头性能
1)  seeker performance
导引头性能
1.
Effect of seeker performance on guidance accuracy for using hit-to-kill technology to intercept tactical ballistic missile;
导引头性能对拦截战术弹道导弹制导精度的影响
2)  seeker capability evaluation
导引头性能评估
1.
The principle of evaluation system is analyzed and two IR seeker capability evaluation system are designed.
辐射式和数字图像注入式是红外成像导引头性能评估的两种实现方式,由于注入式仿真试验不受红外景像转换器等关键技术的制约,具有结构简单,性价比较高的优点,成为有限条件下理想的导引头性能评估手段。
3)  seeker [英]['si:kə(r)]  [美]['sikɚ]
导引头
1.
Study on disturbance rejection rate of a seeker servo system;
导引头稳定系统隔离度研究
2.
Research on 3D Scene Simulation Drived by Missile seeker;
导引头驱动的三维场景模拟技术研究
3.
Antijamming performance evaluation of active/passive radar guided seekers of antiship missiles;
反舰导弹主被动雷达复合导引头抗干扰性能评估研究
4)  homing head
导引头
1.
An automatic vibration performance test system based on virtual instrument technology for coordinator of homing head is introduced.
介绍了一种基于虚拟仪器的导引头位标器振动性能自动测试系统。
2.
This paper introduces the proportional navigation laws and the design of proportional navigation laws for missile control system,it s focus on the math modeling of homing head,the result of the simulation shows that the proportional navigation laws in design of missile control system is effective.
介绍了比例导引规律及比例导引规律制导控制系统设计,着重讨论了导引头数学建模过程,同时通过仿真计算表明比例导引规律在导弹控制系统设计中的可行性。
3.
In this paper, the construction and working principle of the simulated target revolving stage control system, which uses 8031 single chip micro-computer as its key part, are introduced, according to the homing head tracking characteristics testing requirement about a certain missile.
本文针对某导弹导引头跟踪特性测试中的目标模拟转台,介绍了以8031单片机为核心的目标模拟转台控制系统的构成及基本原理,介绍了转台调零、转速调整的基本思路,给出了程序流程图。
5)  PD missile header
PD导引头
1.
Based on a certain pattern, this paper discusses the design guide line and concrete implementation scheme of a general-purpose PD missile header target simulator.
叙述了基于某型PD导引头的通用目标模拟器的设计思路和具体实现方案,着重介绍了系统中所应用的宽带接收、视频回波的单边带调制和高精度功率衰减技术。
6)  follow-up device
[航]导引头
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条