1) the Minimum breaking load
最小断裂载荷
2) maximum breaking load
最大断裂载荷
3) fracture load
断裂载荷
1.
Prediction of piezoelectric fracture load by damage extension force;
根据损伤扩展力预测压电断裂载荷
4) breaking load
断裂荷载
1.
The impact of humidity and tearing on the breaking load of gypsum plasterboard
湿度和撕裂情况对纸面石膏板断裂荷载的影响
6) bending failure load
抗弯断裂荷载
1.
When the specimen was immersed in 25 °C water for 1～5 d, the bending failure load did not change with the time, but it is obviously lower than that under the dry and room temperature condition.
结果表明:当AFRP-水泥砂浆试件在25°C水中浸泡1～5d,其抗弯断裂荷载随时间的增加基本不变,但显著低于室温干燥条件下的抗弯断裂荷载;当试件在60°C水中浸泡1～5d,其抗弯断裂荷载随时间的增加而逐渐上升;当试件在90°C水中浸泡1～5d,相应的抗弯断裂荷载随时间的增加呈先增大后减小趋势。
2.
The experimental results indicate that when the temperatures are 60 ℃ and 150 ℃ respectively, the bending failure load of CFRP-cement mortar is higher than the bending failure load at room temperature.
结果表明:在 60,150℃下,CFRP-水泥砂浆的抗弯断裂荷载高于常温值,而在 200,250 ℃下则远低于常温值,其中250 ℃下的比水泥砂浆还低。
补充资料：最小辐亮度与最小辐照度(见核爆炸火球)
最小辐亮度与最小辐照度(见核爆炸火球)
minimum-brightness and minimum-irradiance
zuixiao fuliangdu yu zuixiaofu乙haodu最小辐亮度与最小辐照度(minimum-brightness and而nimum一irradianee)见核爆炸火球。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条