2) wire race ball bearing
钢丝滚道球轴承
1.
Simulation of point contact problem in a wire race ball bearing based on finite element method;
钢丝滚道球轴承的点接触问题有限元仿真
2.
The contact problem between balls and wire races in the wire race ball bearing with a large diameter was treated as a non-conformal contact problem.
将大型钢丝滚道球轴承中球-滚道之间的接触问题视为非协调性接触问题,采用Hertz理论分析了其非线性特性。
3.
The contact problem of wire race ball bearing have been analyzed by ANSYS finite element analysis and Hertz s solution,through the compared contact stress results of ANSYS and the solutions deduced from formula of Hertz s solution,the research results show it is feasible by using ANSYS finite element analysis software to analyze contact problem of wire race ball bearing.
运用ANSYS有限元仿真软件以及古典Hertz接触理论,对实际工程中的钢丝滚道球轴承的接触问题进行研究,通过对ANSYS有限元分析得到的接触应力结果与Hertz接触理论推导公式计算的结果进行比较,验证了用ANSYS有限元软件分析钢丝滚道球轴承接触问题的可行性。
3) steel-on-steel bearing
钢-钢轴承
4) bearing steel
轴承钢
1.
Optimization and design of thickness of bearing steel layer diffusion bonding on titanium alloy surface;
钛合金表面扩散焊接轴承钢硬化层厚度的优化设计
2.
Formation and controlling of calcium-aluminates inclusions in bearing steel;
轴承钢中钙铝酸盐夹杂物的形成及控制
3.
An Analysis on Micro-Inclusion in Bearing Steel at Each Procedure of BOF-LF-VD-CC Flow Sheet;
转炉-LF-VD-CC流程轴承钢显微夹杂物的分析
5) GCr15 Bearing Steel
GCr15轴承钢
1.
A Study on High Temperature Mechanical Properties of GCr15 Bearing Steel;
GCr15轴承钢高温力学性能的研究
2.
Finite Element Analysis on Internal Stress of Rolling Workpiece of GCr15 Bearing Steel;
GCr15轴承钢轧件内部应力的有限元分析
3.
Practice of GCr15 Bearing Steel Production by 50 t EBT EAF-LF(VD)-CC Process;
莱钢50t EBT EAF-LF(VD)-CC生产GCr15轴承钢的工艺实践
6) GCr18Mo bearing steel
GCr18Mo轴承钢
1.
Pilot Production of High Quality Heavy Round Sections of GCr18Mo Bearing Steel;
高品质大规格GCr18Mo轴承钢的试制
2.
Morphologies and fine structure of lower bainite of GCr18Mo bearing steel were analyzed using optical microscope(OM) and transmission electron microscope(TEM),and transformation mechanism of lower bainite was discussed.
利用光学显微镜和透射电镜观察和分析了GCr18Mo轴承钢的下贝氏体组织形貌和精细结构,探讨了下贝氏体组织转变机理。
补充资料：不锈轴承钢
分子式：
CAS号：
性质：又称不锈轴承钢。适合制造特别要求耐蚀的轴承用钢种，是适应现代化学、石油、造船等工业的发展而开发的新型轴承钢。制成的轴承要在各种腐蚀环境中工作，必须有高的耐蚀性能和一定的硬度。高碳马氏不锈钢9Cr18和9Cr18M，即是能满足上述要求的耐蚀轴承钢。
CAS号：
性质：又称不锈轴承钢。适合制造特别要求耐蚀的轴承用钢种，是适应现代化学、石油、造船等工业的发展而开发的新型轴承钢。制成的轴承要在各种腐蚀环境中工作，必须有高的耐蚀性能和一定的硬度。高碳马氏不锈钢9Cr18和9Cr18M，即是能满足上述要求的耐蚀轴承钢。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条