说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热力学性能优化
1)  thermodynamic performance optimization
热力学性能优化
2)  thermodynamic optimization
热力学优化
1.
Some advances in study of thermodynamic optimization theory;
热力学优化理论的研究进展
2.
The development of constructal theory, which had been one of the new approachs of general thermodynamic optimization, were reviewed.
回顾了构形理论的产生与发展过程,指出其是广义热力学优化发展的一个新方向;阐明了热力学优化过程中运用该理论对装置进行优化的重要作用;综述了该理论拓展应用于传热、流体流动、干燥、交通运输、管网以及经济决策等领域现状;介绍了自然界中各种形式的系统和组织(生命体和非生命系统),其结构均源自于要达到整体性能最优目的这一深刻命题;指出了构形理论与场协同理论结合进行研究是下一步的发展方向。
3.
The thermodynamic optimization and the thermoecomonic optimization of the typical household central air conditioning system were made respectively, and their results were compared.
建立了户式中央空调常用制冷剂HCFC22热物性的仿真模型,在VC 环境下编制了仿真程序;提出了户式中央空调系统的热经济学优化方法,对典型的户式中央空调系统进行了热力学和热经济学优化,并对两者优化结果进行了比较 结果表明,户式中央空调系统的热经济学优化方法能够克服热力学优化方法的弊端,有利于减少系统的年生产费用,是一种值得推广使用的新方法。
3)  thermodynamic properties
热力学性能
1.
1 program based on the density functional theory,heat of formation,cohesive energy,thermodynamic properties and density of states(DOS) of the alloying system were investigated to explain the mechanism of the influence of Sb,Bi alloying on improving heat resistance properties of Mg-Al alloy.
1程序,从合金形成热、结合能、热力学性能和态密度等方面,研究Sb、Bi合金化提高Mg-Al系合金抗蠕变性能的影响机理。
2.
The thermodynamic properties of metallic nanoparticles not only depend on the particle size,but al- so depend on the particle shape.
金属纳米微粒的热力学性能不仅依赖于纳米微粒的尺寸,还依赖于纳米微粒的形状。
3.
The reaction resultant was analyzed and characterized,and the effect of milling time on the transformation pattern of the synthesized resultants of the ball-milling reaction system and thermodynamic properties of the milled composites were investigated by using X-ray diffraction(XRD),thermal analysis(TG-DSC),and mass spectrum(MS).
以LiAlH4和AlCl3为原料,采用机械球磨固相化学反应方法合成铝氢化合物,通过XRD、TG-DSC和MS等方法对反应产物进行分析和表征,研究不同球磨时间对球磨反应体系合成产物的转变规律和对产物热力学性能的影响。
4)  thermodynamics [英][,θɜ:məʊdaɪ'næmɪks]  [美]['θɝmodaɪ'næmɪks]
热力学性能
1.
The effects of the Ce content on the structure, thermodynamics, electrochemical properties and kinetic performance of the AB5-type hydrogen storage alloys La0.
2B5的结构、热力学性能、电化学性能和动力学性能的影响。
5)  thermo-mechanical property
热-力学性能
6)  thermodynamic performance
热力学性能
1.
Based on the first and second laws of thermodynamics,the effect of fouling on t he thermodynamic performance of fully developed laminar convective heat transfer process through a duct with constant wall temperature and constant wall heat fl ux respectively has been investigated analytically.
采用热力学第二定律,分别在恒壁温和恒热流两种典型工况下分析了污垢对管内层流换热性能的影响;引入单位传热量的熵增率对污垢管道的热力学性能进行了评价;讨论了管内流体雷诺数(无污垢时)、量纲为1的入口换热温差、量纲为1的热流密度和污垢层厚度等参数对单位传热量熵增率的影响;并把结果和紊流时的对应工况进行了比较。
2.
This paper is based on the first and second laws of thermodynamics and the effect of fouling on the thermodynamic performance of convective heat transfer process through a duct wit.
基于热力学第一、二定律 ,在恒壁温工况下分析了污垢对管内对流换热过程热力学性能的影响 ;提出了反映污垢对管内对流换热过程热力学性能影响的指标———单位传热量的熵增率 ;讨论了管内流体Reynolds数(无污垢时 )和量纲为 1的入口换热温差等参数对单位传热量熵增率的影响 。
3.
On the basis of the first and second laws of thermodynamics and under constant heat flux conditions an analysis was conducted of the influence of fouling on the thermodynamic performance of convection heat exchange process in a tube.
基于热力学第一、二定律 ,在恒热流工况下分析了污垢对管内对流换热过程热力学性能的影响 ,提出了一项在恒热流工况下反映污垢对管内对流换热过程热力学性能影响的指标———无因次熵产相对增加数 ;讨论了管内流体雷诺数(无污垢时 )和无因次热流密度等参数对无因次熵产相对增加数的影响。
补充资料:热力学:热力学第零定律
热力学第零定律:
热力学中以热平衡概念为基础对温度作出定义的定律。通常表述为﹕与第三个系统处於热平衡状态的两个系统之间﹐必定处於热平衡状态。图中A 热力学第零定律示意图 ﹑B 热力学第零定律示意图 ﹑C 热力学第零定律示意图 为 3个质量和组成固定﹐且与外界完全隔绝的热力系统。将其中的B ﹑C 用绝热壁隔开﹐同时使它们分别与A 发生热接触。待A 与B 和A 与C 都达到热平衡时﹐再使B 与C 发生热接触。这时B 和C 的热力状态不再变化﹐这表明它们之间在热性质方面也已达到平衡。第零定律表明﹐一切互为热平衡的系统具有一个数值上相等的共同的宏观性质──温度。温度计所以能够测定物体温度正是依据这个原理。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条